Color stability and colorant effect on maxillofacial elastomers. Part I: colorant effect on physical properties.

STATEMENT OF PROBLEM The average clinical life span of a maxillofacial prosthesis is approximately 6 months, at which point it needs to be refabricated, mainly because of degradation of the color and physical properties of the prosthesis. PURPOSE This first part of a 3-part study evaluated the effect of coloring agents on the physical properties of maxillofacial elastomers. METHODS AND MATERIAL Five dumbbell-shaped and 5 trouser-shaped specimens were fabricated for each of the combinations of the 3 elastomers (Silastic medical adhesive type A, Silastic 4-4210, and Silicone A-2186) and 6 colorants (dry earth pigments, rayon fiber flocking, artist's oil paints, kaolin, liquid cosmetics, and no-colorants), for a total of 180 specimens. Evaluations of hardness and tear strength were made with the trouser-shaped specimens. Evaluations of the ultimate tensile strength and the percentage elongation were made with the dumbbell-shaped specimens. A within elastomer analysis compared the 6 colorants using a 1-way analysis of variance for each of the 4 physical properties. When significant differences were observed, the Student-Newman-Keuls multiple range test was used to identify differences between groups at a significance level of.05. RESULTS Physical properties of maxillofacial elastomers were changed by the incorporation of coloring agents. Dry earth pigments, kaolin, and rayon flocking acted as a solid filler without bonding to the Silicone, and artists' oils and liquid cosmetics acted as a liquid phase without bonding to the silicone matrix. CONCLUSION No clearly superior colorant-elastomer combination was demonstrated in all the tests in this study.