Pneumatic splints: fabrication and use in neurorehabilitation.
نویسندگان
چکیده
Asymmetrical tone and weakness in antagonistic muscles often result in misalignment of joint, contractures and deformities. Traditional static splints used to prevent these complications are expensive, have to be custom made and cannot be used when deformities are marked. Authors describe fabrication and use of pneumatic splints, which are economic, safe and easy to apply. These splints have wide application in the management of common medical problems in neurological rehabilitation like hypotension, edema, pain, spasticity and early deformities.
منابع مشابه
Pneumatic Control of Robots for Rehabilitation
Pneumatic actuators are attractive for robotic rehabilitation applications because they are lightweight, powerful, and compliant, but their control has historically been difficult, limiting their use. In this paper we present the pneumatic control system developed for Pneu-WREX: a pneumatically actuated, upper extremity orthosis for rehabilitation after stroke. The developed pneumatic control s...
متن کاملSimple and Low-cost Fabrication Protocol for Producing 100’s of Pneumatic Microvalves in All-pdms Substrates for Microfluidics Research
This work reports a unique fabrication protocol that would enable microfluidic researchers to prototype complex microfluidic circuits that require 100s (or less) of pneumatic microvalves in all-Polydimethylsiloxane (PDMS) substrates. The protocol is simple, facilitates rapid prototyping, avoids some drawbacks of corona/plasma bonding, does not require cleanroom use and can be used for high or l...
متن کاملEvaluation of a digitised splinting approach with multiple-material functionality using Additive Manufacturing technologies
The design and fabrication of custom-made wrist immobilisation splints can be a laborious process. In addition, patient adherence in terms of wear duration and frequency may be affected by a range of contributing factors including poor aesthetics, hygiene issues and fit. This paper suggests the use of additive manufacturing (AM) in a bid to resolve factors affecting adherence and improve the ef...
متن کاملUse of light-cured resin to manufacture occlusal splints: report of two cases.
This article presents selected cases of patients with functional disorders of the stomatognathic system. This group of patients had a need to made different types of removable occlusal splints. In the past, occlusal appliances were made mostly using self-cured acrylate materials, which for many years had no replacements. The rapid development of dental materials technology led to creation of th...
متن کاملControl of soft machines using actuators operated by a Braille display.
One strategy for actuating soft machines (e.g., tentacles, grippers, and simple walkers) uses pneumatic inflation of networks of small channels in an elastomeric material. Although the management of a few pneumatic inputs and valves to control pressurized gas is straightforward, the fabrication and operation of manifolds containing many (>50) independent valves is an unsolved problem. Complex p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Neurology India
دوره 50 1 شماره
صفحات -
تاریخ انتشار 2002