High-sensitivity fiber-tip pressure sensor with graphene diaphragm.
نویسندگان
چکیده
A miniature fiber-tip pressure sensor was built by using an extremely thin graphene film as the diaphragm. The graphene also acts as a light reflector, which, in conjunction with the reflection at the fiber end-air interface, forms a low finesse Fabry-Perot interferometer. The graphene based sensor demonstrated pressure sensitivity over 39.4 nm/kPa with a diaphragm diameter of 25 μm. The use of graphene as diaphragm material would allow highly sensitive and compact fiber-tip sensors.
منابع مشابه
Design of High Sensitivity and Linearity Microelectromechanical Systems Capacitive Tire Pressure Sensor using Stepped Membrane
This paper is focused on a novel design of stepped diaphragm for MEMS capacitive pressure sensor used in tire pressure monitoring system. The structure of sensor diaphragm plays a key role for determining the sensitivity of the sensor and the non-linearity of the output.First the structures of two capacitive pressure sensors with clamped square flatdiaphragms, with different thicknesses are inv...
متن کاملSimulation and Modeling of a High Sensitivity Micro-electro-mechanical Systems Capacitive Pressure Sensor with Small Size and Clamped Square Diaphragm
This paper proposes a Micro-electro-mechanical (MEMS) capacitive pressure sensor that relies on the movable electrode displaced like a flat plate equal to the maximum center deflection of diaphragm. The diaphragm, movable electrode and mechanical coupling are made of polysilicon, gold and Si3N4, respectively. The fixed electrode is gold and the substrate is Pyrex glass. This proposed method inc...
متن کاملHigh-sensitivity, high-frequency extrinsic Fabry-Perot interferometric fiber-tip sensor based on a thin silver diaphragm.
We propose and demonstrate a fiber-tip sensor based on an ultra-thin silver diaphragm for highly sensitive and high frequency ultrasonic detection. The diaphragm is prepared by the vacuum thermal deposition method and then transferred to the fiber tip. The sensor demonstrated in this letter has a 300 nm thick diaphragm with an inner diameter of 75 μm, leading to a static pressure sensitivity of...
متن کاملModeling of capacitance and sensitivity of a MEMS pressure sensor
In this paper modeling of capacitance and sensitivity for MEMS capacitive pressure sensor is presented. In capacitive sensor the sensitivity is proportional to deflection and capacitance changes versus pressure. Therefore first the diaphragm displacement, capacitance and sensitivity of sensor with square diaphragm have been modeled and then simulated using finite element method (FEM). It can b...
متن کاملSub-micron silica diaphragm-based fiber-tip Fabry-Perot interferometer for pressure measurement.
We demonstrate a sub-micron silica diaphragm-based fiber-tip Fabry-Perot interferometer for pressure sensing applications. The thinnest silica diaphragm, with a thickness of ∼320 nm, has been achieved by use of an improved electrical arc discharge technique. Such a sub-micron silica diaphragm breaks the sensitivity limitation imposed by traditional all-silica Fabry-Perot interferometric pressu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics letters
دوره 37 13 شماره
صفحات -
تاریخ انتشار 2012