A Predictive Method for the Heat of Explosion of Non-ideal Aluminized Explosives
نویسندگان
چکیده
The heat of explosion is one of the most important thermodynamic parameters of aluminized explosives. Two improvements in numerical calculations to predict the behaviour of the explosion of non-ideal aluminized explosives were completed in this work. The chemical reaction between aluminum and the C-J detonation products of high energy ingredients was determined and the equation of state for the detonation products of high energy ingredients was revised. The constant k in the BKW equation was revised to obtain perfect results for predicting the C-J parameters for high energy ingredients. The predicted results show that the heats and temperatures of aluminized explosives become maximized when the mass fraction of aluminum powder is 30%, which is in good agreement with the results obtained by empirical formulae.
منابع مشابه
Three-dimensional high order large-scale numerical investigation on the air explosion
Based on the double shockwave approximation procedure and combining the real ghost fluid method (RGFM) with the level-set method, a local Riemann problem for strongly nonlinear equations of state such as the JWL equation of state is constructed, which has suppressed successfully the numerical oscillation caused by high-density ratio and high-pressure ratio across the interface between the explo...
متن کاملمروری بر معادلات حالت مواد منفجره نسوخته
For simulation and analysis of detonation in explosive materials, we need to use equation of state (EOS) for closing of the governing equations. In high explosives, the EOS is divided into two categories, EOS of detonation products and unreacted materials. Most of the explosion specialists are familiar with EOS of detonation products. Therefore, this paper is about introducing and investigating...
متن کاملA novel mathematical model of formulation design of emulsion explosive
A novel mathematical model has been developed to aid the formulation of emulsion explosives. This mathematical model calculated heat of explosion, oxygen balance and raw material cost as a function of explosive ingredients, and the solution of the mathematical model was obtained by a MS Excel program. The effects of the different content of NH4NO3, NaNO3, H2O, and span-80 and composite fuel oil...
متن کاملبررسی کیفیت مومهای صنعتی بهعنوان حساسیتزدا در مواد منفجره
In addition to performance requirements, safety aspects for production, transportation and storage are very important for explosives because they will be irreparable financial losses and casualties malapropos spontaneous explosion. Ability of explosives for response to the stimuli such as impact, Friction, Shock wave, Flame and heat is called sensitivity that is a key factor in determining the ...
متن کاملشبیه سازی آزمون ایمپالس متری VLIP و ارائه روشی برای تعیین معادل TNT انفجاری
The VLIP is a usefull system to compare the high explosives efficiency. This device includes a metallic plate which located above the explosive material and upthrown vertically due to the explosion. The exerted impulse on the plate is used as a meter to determine the explosives efficiency. Since the VLIP system has a low cost, in this paper a method based on VLIP is presented to determine the T...
متن کامل