Ageing monitoring in IGBT module under sinusoidal loading

نویسندگان

  • Pramod Ghimire
  • Kristian Bonderup Pedersen
  • Bjørn Rannestad
  • Stig Munk-Nielsen
چکیده

Article history: Received 25 May 2015 Received in revised form 19 June 2015 Accepted 20 June 2015 Available online xxxx

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of a Heat Flux Sensor in Wind Power Electronics

This paper proposes and investigates the application of the gradient heat flux sensor (GHFS) for measuring the local heat flux in power electronics. Thanks to its thinness, the sensor can be placed between the semiconductor module and the heat sink. The GHFS has high sensitivity and yields direct measurements without an interruption to the normal power device operation, which makes it attractiv...

متن کامل

Junction temperature estimation method for a 600 V, 30A IGBT module during converter operation

On-line VCE_ON and VF Measurement This paper proposes an accurate method to estimate the junction temperature using the on-state collector-emitter voltage and load current. By the proposed method, the estimation error which comes from the different temperatures of the interconnection materials in the module is compensated. Finally, it leads to satisfactory estimated results. The proposed method...

متن کامل

Characterization of high-voltage IGBT module degradations under PWM power cycling test at high ambient temperature

The success of the high temperature power electronic applications depends on the power device reliability. The increasing thermal demands, like in hybrid electric cars, require power devices operating at junction temperatures above their common level of 125 C. The thermal cycles generated in standard modules in such conditions induce several failure mechanisms in their package and chips. This a...

متن کامل

IGBT Module Rupture Categorization and Testing

The isolated base, plastic molded, power semiconductor module assembly has been available for various devices for over twenty years. During this time the power bipolar junction transistor, the BJT, has given way to the Insulated Gate Bipolar Junction Transistor, the IGBT, as the self commutatible device of choice especially for voltage source inverter topologies. As part of the power structure ...

متن کامل

Failure modes and FEM analysis of power electronic packaging

The development of power electronics technology is driven by the insatiate demand to control electrical power. The new power electronics devices reduce the volume of the converters by three to four orders of magnitude compared to their mercury arc predecessor. And the turn-on and turn-o0 time has decreased from milliseconds to the microseconds and even nanoseconds, depending on power level. The...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Microelectronics Reliability

دوره 55  شماره 

صفحات  -

تاریخ انتشار 2015