Static Error Free Tracking Control Based on Linear Quadratic Regulator of 3-DOF Parallel Manipulator with Redundant Actuation
نویسندگان
چکیده
Parallel manipulators have advantages such as high stiffness, low moving inertia, high payload capability, and high accuracy. In this paper, the servo drive system of valve controlled asymmetrical hydraulic cylinder is designed for 4SPS/S parallel manipulator with redundant actuator. A unified nonlinear model suitable for forward and inverse motion is deduced for the valve controlled asymmetrical cylinder system, and simplified from point of engineering application. The global linearized model is established by nonlinear state feedback transformation. The tracking controller with zero steady-state errors based on linear quadratic regulator is designed for the global linearized model. Simulation results show that tracking performance of the proposed controller is good.
منابع مشابه
Robust nonlinear control of a planar 2-DOF parallel manipulator with redundant actuation
A new robust nonlinear controller is presented and applied to a planar 2-DOF parallel manipulator with redundant actuation. The robust nonlinear controller is designed by combining the nonlinear PD (NPD) control with the robust dynamics compensation. The NPD control is used to eliminate the trajectory disturbances, unmodeled dynamics and nonlinear friction, and the robust control is used to res...
متن کاملTracking control of parallel manipulator with 3-DOF
A parallel three degrees of freedom (3-DOF) manipulator known as Maryland manipulator is considered in this paper. The manipulator model considered in this paper is more practical because the offset lengths are not taken zero. The trajectory tracking control of the Maryland manipulator is done using linear–quadratic regulator (LQR) based proportional–integral–derivative (PID) controller. Three ...
متن کاملThe study of model predictive control algorithm based on the force/position control scheme of the 5-DOF redundant actuation parallel robot
Redundant actuated parallel robot is a multi-input and multi-output (MIMO) system which usually works in an uncertain environment. In this paper, the force/position hybrid control structure of 6PUS-UPU redundant actuation parallel robot is designed, proportional-integral (PI) and model predictive control (MPC) cascade control strategy are used in the redundant branch of 6PUS-UPU redundant actua...
متن کاملTrajectory Tracking of a Redundant Hybrid Manipulator Using a Switching Control Method
Abstract—This paper presents the trajectory tracking control of a spatial redundant hybrid manipulator. This manipulator consists of two parallel manipulators which are a variable geometry truss (VGT) module. In fact, each VGT module with 3-degress of freedom (DOF) is a planar parallel manipulator and their operational planes of these VGT modules are arranged to be orthogonal to each other. Als...
متن کاملANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کامل