Epoxy/single Walled Carbon Nanotube Nanocomposite Thin Films for Composites Reinforcement

Epoxy/Single Walled Carbon Nanotube Nanocomposite Thin Films for Composites Reinforcement. (May 2009) Graham Leicester Warren, B.S., Texas A&M University Chair of Advisory Committee: Dr. Hung-Jue Sue This work is mainly focused upon the preparation, processing and evaluation of mechanical and material properties of epoxy/single walled carbon nanotube (SWCNT) nanocomposite thin films. B-staged epoxy/SWCNT nanocomposite thin films at 50% of cure have been prepared for improving conductivity and mechanical performance of laminated composites. The SWCNTs were functionalized by oxidation and subsequent grafting using polyamidoamine generation 0 dendrimers (PAMAM-G0). The epoxy nanocomposites containing SWCNTs were successfully cast into thin films by manipulating degree of cure and viscosity of epoxy. The first section of this study focuses on the covalent oxidation and functionalization of single-walled carbon nanotubes (SWCNTs), which is necessary in order to obtain the full benefit of the SWCNTs inherent properties for reinforcement. In the second section of this work the preparation of B-staged epoxy/SWCNT nanocomposite thin films is discussed and what the purposes of thin films are. Additionally, the morphology as well as mechanical properties is evaluated by numerous means to obtain a clear picture as to the mechanisms of the epoxy/SWCNT