Modelling steel strip heating within an annealing furnace
نویسندگان
چکیده
Annealing furnaces are used to heat steel in order to change its chemical structure. In this paper we model an electric radiant furnace. One of the major defects in steel strips processed in such furnaces is a wave-like pattern near the edges of the strip, apparently due to extra heating near the edges. The aim of the paper is to model this effect and provide a way to calculate the elevated temperatures near the edges. We analyse two processes that are suspected to contribute to uneven heating. The modelling involves an asymptotic analysis of the effect of heat flux at the edges and a detailed analysis of the integral equations associated with radiant heat transfer in the furnace.
منابع مشابه
Mathematical Modelling of an Annealing Furnace for Process Control Applications
Optimisation and improved control of the annealing furnace on a continuous galvanising line was investigated by the construction of a series of mathematical models to predict furnace and strip temperature and strip recrystallisation under both steady and transient states. A modelling approach is followed due to the very poor measurability of temperatures inside the furnace, affected by strong r...
متن کاملA simple control-oriented model of an indirect-fired strip annealing furnace
A simple mathematical model of an indirect-fired strip annealing furnace for real-time control and optimization purposes is developed. The considered furnace is part of a hot-dip galvanizing line and is used for continuous heat treatment of steel strips. The heat that is released during the combustion process inside the radiant tubes is calculated by means of steady-state mass and enthalpy bala...
متن کامل3-D Transient Heat Transfer Analysis of Slab Heating Characteristics in a Reheating Furnace in Hot Strip Mills
Abstract—The reheating furnace is used to reheat the steel slabs before the hot-rolling process. The supported system includes the stationary/moving beams, and the skid buttons which block some thermal radiation transmitted to the bottom of the slabs. Therefore, it is important to analyze the steel slab temperature distribution during the heating period. A three-dimensional mathematical transie...
متن کاملImprovement of the Mechanical Properties of 1022 Carbon Steel Coil by Using the Taguchi Method to Optimize Spheroidized Annealing Conditions
Cold forging is often applied in the fastener industry. Wires in coil form are used as semi-finished products for the production of billets. This process usually requires preliminarily drawing wire coil in order to reduce the diameter of products. The wire usually has to be annealed to improve its cold formability. The quality of spheroidizing annealed wire affects the forming quality of screws...
متن کاملThe Automation Control System Design of Walking Beam Heating Furnace
Combining the transformation project of certain strip steel rolling production line, the techniques process of walking beam heating furnace was elaborated in this paper. The practical application of LOS-T18-2ZC1 laser detector was elaborated. The network communication model of walking beam heating furnace control system was designed. The realization method of production process automation contr...
متن کامل