IJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 01, 2017 | ISSN (online): 2321-0613
نویسندگان
چکیده
It was recently presented that the Reluctance Synchronous Motor (RSM) is well suited for variable gear electric as well as for hybrid electric vehicles. This paper deeply investigates the capabilities of a Reluctance Synchronous Motor and proposes a multi parameter estimation scheme for Reluctance Synchronous Motor under variable-speed control. The proposed control evaluation model is fully efficient and has taken into account the estimation and compensation of voltage-source-inverter nonlinearity. The RSM will work under variable speed control, and the proposed estimation model is calculated using the recorded two sets of machine data corresponding to two sets of different rotor speeds. The proposed estimation model can be solved by using a conventional Quantum Genetic Algorithm. The drawback of adopting permanent magnets is the possible demagnetization of the magnets themselves. This can greatly limit the maximum overload capability of the motor, which is a salient requirement of a traction motor. The salient requirement of a traction motor can greatly limit the maximum overload capability of the motor. The Reluctance Synchronous Motor improves its capabilities by avoiding the use of rare-earth permanent magnets.
منابع مشابه
IJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 01, 2017 | ISSN (online): 2321-0613
4-methylaniline in chlorobenzene reacted with sulphuric acid, sodium thiocyanate and sulfuryl chloride to give 2-amino-6-methyl benzothiazole. This 2-amino-6methyl benzothiazole was later further reacted with 2-(2,2difluoroethoxy)-6-(trifluoromethyl)benzene-1-sulfonyl chloride in the presence of Dichloromethane and anhydrous Pyridine to afford 2-(2,2-difluoroethoxy)-N-(6methylbenzo[d]thiazole-2...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 5, Issue 01, 2017 | ISSN (online): 2321-0613
Electrocardiogram (ECG) signal compression is playing a vital role in biomedical applications. The signal compression is meant for detection and removing the redundant information from the ECG signal. This paper proposes a new technique of ECG compression using Wavelet packet transform methods up to 4th level of decomposition. The quality measurement of the reconstructed signal in an electrocar...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 2, Issue 07, 2014 | ISSN (online): 2321-0613
This paper investigated the performance of Mary DPSK on Rayleigh Channel on the basis of Bit Error Rate (BER). BER is calculated by using simulation of system model consisting of source, modulator, channel and demodulator on MATLAB platform.
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 03, 2016 | ISSN (online): 2321-0613
A Parallel multiplier using approximate compressors are proposed in this paper. The two new approximate 4-2 compressors are proposes that the simplified compressors have better power consumption than the optimized 4-2 compressor existing designs. These approximate compressors are then used in the restoration module of a Parallel multiplier. Four different schemes for utilizing the proposed appr...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 10, 2016 | ISSN (online): 2321-0613
several edge recognition strategies have now been planned within the past decades. Many are derived from differential strategies such as for example Sobel, Roberts, Laplacian operators, and therefore on. Nevertheless these calculations are quite sensitive to sound, in order to restrain sound before sensing edges. In this report intensive literature review has been presented in numerous edge rec...
متن کاملIJSRD - International Journal for Scientific Research & Development| Vol. 4, Issue 02, 2016 | ISSN (online): 2321-0613
This paper describes the cross-talk analysis of high-speed PCB design. Some models using multiple PCB traces above a ground plane having guard traces and vias are taken and the results are obtained from modeling and simulation using Ansoft HFSS software tool and are compared with the experimental results. Reduction techniques of crosstalk are highlighted.
متن کامل