Laser Ablation – Emerging Patterning Technology for Advanced Packaging
نویسندگان
چکیده
INTRODUCTION Wafer Level Packages have emerged as the fastest growing semiconductor packaging technology. Rather than a single solution, wafer level packaging technologies are a set of different solutions including flip-chip wafer bumping, electroplated gold, solder bumps and recent copper pillar technologies. These chips can be
منابع مشابه
Study of laser ablation using nano-second laser pulses
In this paper, the laser ablation process based on the irradiation of nanosecond pulsed lasers on a copper target surface in the presence of Helium gas is studied. The dynamical behaviors of the generated plasma in the helium gas and evaporated copper at the atmospheric pressure are examined using a laser pulse, laser wavelength of and intensity of 7×1010W/cm2. A one-dimensional thermal model ...
متن کاملProcessing microstructure on film by femtosecond laser
Selective laser patterning of thin films in a multilayer film is an emerging technology for fabrication of MEMS devices. A 775 nm Ti:sapphire laser (130 fs, 1 kHZ) was used to irradiate the thin film stacks with variations in process parameters such as feed rate and numerical aperture of objective lens. Femtosecond laser patterning of Au/Cr films which have the same thickness of about 1000 nm a...
متن کاملNonlinear Optical Absorption of Carbon Nanostructures Synthesized by Laser Ablation of Highly Oriented Pyrolytic Graphite in Organic Solvents
In this study, Highly Oriented Pyrolytic Graphite was ablated in various polar and nonpolar solvents by Q-switched neodymium: yttrium-aluminum-garnet laser (wavelength=1064 nm, frequency=2 kHz, pulse duration=240 ns). Then, the products were examined using Scanning Electron Microscopy and UV-Vis spectroscopy. The images showed that different carbon structures such as cauliflower-like structures...
متن کاملNanosecond Laser Surface Patterning of Bio Grade 316L Stainless Steel for Controlling its Wettability Characteristics
In this work, potential of the nanosecond laser processing technique on manipulating the surface wettability of 316L bio grade stainless steel is investigated. Results show that the steel wettability toward water, improves significantly after the laser treatment. Different analyses are assessed in correlation with wettability using Scanning Electron Microscope (SEM), Scanning Tunneling Microsco...
متن کامل