The influence of polymer purification on the efficiency of poly(3-hexylthiophene):fullerene organic solar cells
نویسندگان
چکیده
We report the influence of different polymer purification procedures on the photovoltaic performance of bulk heterojunction solar cells formed from binary blends of poly(3-hexylthiophene) (P3HT) and fullerenes. Selective Soxhlet extractions and metal scavenging agents were used to remove residual monomer, magnesium salt by-products and catalyst from high-weight P3HT (Mw 121 kg/mol, PDI 1.8, RR 99%) synthesised by the Grignard metathesis (GRIM) polymerization route. Using phenyl-C61-butyric acid methyl ester (PC60BM) as an electron acceptor, we observed an increase in average power conversion efficiency from 2.3 to 4.8% in going from crude to fully purified material. Using indene-C60 bisadduct (IC60BA) in place of PC60BM, we observed a further increase to an average value of 6.6% - high for a bulk heterojunction formed from a binary blend of P3HT and C60 fullerene derivatives.
منابع مشابه
Printing highly efficient organic solar cells.
The technological attraction in organic solar cells is their compatibility to printing processes. However, up to today, nearly no literature on "printed" organic solar cells have been published and the major body of the research work was done by spin coating or blading techniques. Transferring the spin-coating or doctor blading process currently used for the fabrication of bulk heterojunction s...
متن کاملEffect of TiO2 Nanofiber Density on Organic-Inorganic Based Hybrid Solar Cells (RESEARCH NOTE)
Abstract In this work, a comparative study of hybrid solar cells based on P3HT and TiO2 nanofibers was accomplished. Electrospinning, a low cost production method for large area nanofibrous films, was employed to fabricate the organic-inorganic hybrid solar cells based on poly (3-hexylthiophene) and TiO2 nanofibers. The performance of the hybrid solar cells was analyzed for four density levels ...
متن کاملMolecular Electronic Coupling Controls Charge Recombination Kinetics in Organic Solar Cells of Low Bandgap Diketopyrrolopyrrole, Carbazole, and Thiophene Polymers
Low-bandgap diketopyrrolopyrrole- and carbazole-based polymer bulk-heterojunction solar cells exhibit much faster charge carrier recombination kinetics than that encountered for less-recombining poly(3-hexylthiophene). Solar cells comprising these polymers exhibit energy losses caused by carrier recombination of approximately 100 mV, expressed as reduction in open-circuit voltage, and consequen...
متن کاملHigh Efficiencies in Nanoscale Poly(3-Hexylthiophene)/Fullerene Solar Cells
A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...
متن کاملPassivating ZnO Surface States by C60 Pyrrolidine Tris-Acid for Hybrid Solar Cells Based on Poly(3-hexylthiophene)/ZnO Nanorod Arrays
Construction of ordered electron acceptors is a feasible way to solve the issue of phase separation in polymer solar cells by using vertically-aligned ZnO nanorod arrays (NRAs). However, the inert charge transfer between conducting polymer and ZnO limits the performance enhancement of this type of hybrid solar cells. In this work, a fullerene derivative named C60 pyrrolidine tris-acid is used t...
متن کامل