A Compact Reformer for Portable Fuel Cells
نویسندگان
چکیده
A compact reformer to generate hydrogen for portable fuel cell applications is presented. This reformer is a conventional type single-path tubular reactor packed with granular catalyst particles in which steam reforming and catalytic partial oxidation reactions take place in series using a mixture of methanol and water as a feed. The novel feature of this reformer is in the interlacing of the flow path for efficient heat transfer between the reactor sections where the endothermic steam reforming reaction and the exothermic partial oxidation reaction are taking place respectively. Experiment using a commercial catalyst (CuO/ZnO/Al2O3) showed a feed conversion as large as 85% at an operating temperature of 250 ̊C or below, and the hydrogen concentration higher than 75% in the product gas. Observed pressure drop for the gaseous flow through a packed tube agrees well with a theoretical prediction.
منابع مشابه
Microreaction for Microfuel Processing: Challenges and Prospects
The processing of high density liquid hydrocarbon fuels appears to be the most promising method of supplying a hydrogen stream for feeding portable fuel cells. Furthermore, microchemical systems are a strong enabling aspect of compact fuel processors due to their advantageous heat and mass transport and inherent compactness. However, a number of crucial challenges exist for the realization of p...
متن کاملDirect Methanol Fuel Cell Thermodynamic Simulation
The direct methanol fuel cell (DMFC) is considered a viable power production technology for portable electronics equipment (10’s-100’s watts) and transportation vehicles (10’s-100’s kilowatts). Since methanol is relatively inexpensive and a reformer or other fuel processing equipment is not required for the DMFC, this power system has the potential to be low cost, compact, reliable and fuel eff...
متن کاملWater-balance Assessment in a Reformer/Fuel-cell System
Abstract. In PEM fuel cells pure hydrogen is used as a fuel. Due to its low density, the density of its stored energy is low, too. One of the possible solutions to the problem is production of hydrogen from the energy-reach material, e.g. methanol. Conversion of methanol to hydrogen is made with reformer in a steam reforming process in which besides methanol there is also water needed. On the o...
متن کامل2D Heat and Mass Transfer Modeling of Methane Steam Reforming for Hydrogen Production in a Compact Reformer
Compact reformers (CRs) are promising devices for efficient fuel processing. In CRs, a thin solid plate is sandwiched between two catalyst layers to enable efficient heat transfer from combustion duct to the reforming duct for fuel processing. In this study, a 2D heat and mass transfer model is developed to investigate the fundamental transport phenomenon and chemical reaction kinetics in a CR ...
متن کاملNear-Optimal Controls of a Fuel Cell Coupled with Reformer using Singular Perturbation methods
A singularly perturbed model is proposed for a system comprised of a PEM Fuel Cell(PEM-FC) with Natural Gas Hydrogen Reformer (NG-HR). This eighteenth order system is decomposedinto slow and fast lower order subsystems using singular perturbation techniques that provides tools forseparation and order reduction. Then, three different types of controllers, namely an optimal full-order,a near-opti...
متن کامل