Stability Control of Retained Goaf-Side Gateroad under Different Roof Conditions in Deep Underground Y Type Longwall Mining

نویسندگان

  • Zhiyi Zhang
  • Hideki Shimada
  • Takashi Sasaoka
  • Akihiro Hamanaka
چکیده

Stability of the retained goaf-side gateroad (RGSG) is influenced mainly by the movements of the roof strata near coal seam after coalface passes by. To make effective controlling technology for the stability of the RGSG, we analyze the roof structure over the RGSG to illustrate the mechanism causing the RGSG instability under different roof conditions. We then examine the dynamic evolution of the deformation and abutment stress in the rock surrounding the RGSG during coal seam mining, using the FLAC3D numerical software to reveal the instability characteristics of the RGSG under different roof conditions. Next, corresponding stability controlling technologies for the RGSGs are proposed and tested in three typical deep underground coalmines. Results show that: sink and rotation of the roof cantilever over the RGSG impose severer influence on the stability of the RGSG. The RGSG suffers disturbances three times during the coal-seam mining, and the deformation and abutment stress in the rock surrounding the RGSG increase significantly when the main roof becomes thicker and the immediate roof becomes thinner. Staged support technology involving grout cable bolts has better controlling results of the RGSG stability than that composed of conventional rock bolts, when the RGSG is beneath weak immediate roof with large thickness. Roof structure optimizing technology involving pre-split technology can improve the stability of the RGSG effectively when the RGSG is covered by hard main roof with large thickness directly.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Gateroad Design in Overlying Multi-seam Mines

There are two major design problems for upper seam longwall gateroads operating in a multi-seam environment. The first is to determine the location, magnitude and duration of stress transferred from lower seam mines; and the second is to predict the effect of stress transferred from lower seam mines on opening stability. To solve these problems for both longwall and room-and-pillar mines, case ...

متن کامل

Gas Drainage Improvement in Underground Coal Mines

Effective gas management is vital to the success of the longwall mining in the Bulli seam, in the Southern Coalfield, Sydney Basin, NSW, Australia. The evolution of gas drainage methods and practices are discussed with respect to gas type, gas drainage lead time and prevailing geological conditions. Both underground to inseam drilling and surface to inseam drilling techniques are described at b...

متن کامل

Computational fluid dynamics simulations for investigation of parameters affecting goaf gas distribution

It is necessary to obtain a fundamental understanding of the goaf gas flow patterns in longwall mine in order to develop optimum goaf gas drainage and spontaneous combustion (sponcom) management strategies. The best ventilation layout for a longwall underground mine should assist in goaf gas drainage and further reduce the risk of sponcom in the goaf. Further, in the longwall panel, regulators ...

متن کامل

Fundamental understanding of goaf gas displacement in longwall goaf

Fundamental understanding of the goaf gas distribution in a gassy coal mine is necessary for developing effective goaf gas drainage strategies in the longwall coal mine. The goaf gas was subjected to the surface and body forces that were classified depending upon whether they acted on the surface area or the volume of the gas element. Of these forces, the body forces were more predominant in di...

متن کامل

Long-term stability analysis of goaf area in longwall mining using minimum potential energy theory

Estimation of the height of caved and fractured zones above a longwall panel along with the stability conditions of the goaf area are very crucial to determine the abutment stresses, ground subsidence, and face support as well as designing the surrounding gates and intervening pillars. In this work, the height of caving-fracturing zone above the mined panel is considered as the height of destre...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017