The Use of Tactile Sensors and PIV Analysis for Understanding the Bearing Mechanism of Pile Groups
نویسندگان
چکیده
Model tests were carried out in dry silica sand under pile loading and visualizing observation to investigate the behavior of a pile group. The pile group consisted of nine cylindrical model piles of 40 mm in diameter in most tests or three rectangular parallelepiped model piles in the visualizing observation. Pile spacings of 200 mm and 100 mm between pile centers were used in the models. Tactile sensors were installed to measure the pressure distribution in the ground and colored sand layer with particle image velocimetry (PIV) analysis to reveal the ground deformation in addition to strain gauges inside the model piles to investigate the interaction among group piles. The tests results showed that a narrower spacing between piles resulted in a wider affected area of the ground and the interaction was more significant below the tips.
منابع مشابه
Stabilization of Earth Slope by Waste Tire using Experimental Tests and PIV
ABSTRACT The issue of environmental protection has led researchers to pay serious attention to waste tires. Civil engineers have found that waste tires can increase bearing capacity, earth slope stability, and other useful applications in civil engineering. In this paper, a series of experimental modeling have been performed to investigate the effect of waste tires on increasing the stabi...
متن کاملDIFFERENT NEURAL NETWORKS AND MODAL TREE METHOD FOR PREDICTING ULTIMATE BEARING CAPACITY OF PILES
The prediction of the ultimate bearing capacity of the pile under axial load is one of the important issues for many researches in the field of geotechnical engineering. In recent years, the use of computational intelligence techniques such as different methods of artificial neural network has been developed in terms of physical and numerical modeling aspects. In this study, a database of 100 p...
متن کاملComparative Study of Anchored Wall Performance with Two Facing Designs
The present study compared the performance of soldier pile and concrete bearing pad anchored wall facings. Using Abaqus finite element software, two case studies have been precisely represented for the facing designs and effects of the parameters of soil type, spacing of anchors and facings, surcharge and facing sizes were investigated. The analysis results indicate that the soldier pile method...
متن کاملSeismic Bearing Capacity of Strip Footings on Pile-Stabilized Slopes
This paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. The resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. This comparison indicates an acceptable agreement. The variants of the study incl...
متن کاملThe Application of Tactile Experience in Urban Perception
Urban perception is the result of mutual transaction between human and environment and the process of perception is developed through the three continuous steps of “sensation”, “perception” and “cognition”. In the first step (sensorial perception), the environmental signals are received via sensorial sensors and each different sense based on its own essence, performance and ability has its own ...
متن کامل