Development of AlN/Epoxy Composites with Enhanced Thermal Conductivity
نویسندگان
چکیده
AlN/epoxy composites with high thermal conductivity were successfully prepared by infiltrating epoxy into AlN porous ceramics which were fabricated by gelcasting of foaming method. The microstructure, mechanical, and thermal properties of the resulting composites were investigated. The compressive strengths of the AlN/epoxy composites were enhanced compared with the pure epoxy. The AlN/epoxy composites demonstrate much higher thermal conductivity, up to 19.0 W/(m·K), compared with those by the traditional particles filling method, because of continuous thermal channels formed by the walls and struts of AlN porous ceramics. This study demonstrates a potential route to manufacture epoxy-based composites with extremely high thermal conductivity.
منابع مشابه
The use of polyimide-modified aluminum nitride fillers in AlN@PI/Epoxy composites with enhanced thermal conductivity for electronic encapsulation
Polymer modified fillers in composites has attracted the attention of numerous researchers. These fillers are composed of core-shell structures that exhibit enhanced physical and chemical properties that are associated with shell surface control and encapsulated core materials. In this study, we have described an apt method to prepare polyimide (PI)-modified aluminum nitride (AlN) fillers, AlN@...
متن کاملInfluence of nano-AlN particles on thermal conductivity, thermal stability and cure behavior of cycloaliphatic epoxy/trimethacrylate system
We have prepared a series of nano-sized aluminium nitride (nano-AlN)/cycloaliphatic epoxy/trimethacrylate (TMPTMA) systems and investigated their morphology, thermal conductivity, thermal stability and curing behavior. Experimental results show that the thermal conductivity of composites increases with the nano-AlN filler content, the maximum value is up to 0.47 W/(m!K). Incorporation of a smal...
متن کاملSU8 nanocomposite photoresist with enhanced thermal conductivity
Composites with nanoparticles and polymers can improve the functionalities and existing formulations. In this work we synthesized Graphene Oxide and is incorporated into an epoxy based negative tone photoresist in different weight percentages. Thermal conductivity studies were carried out on those composites and it was found that 13 % by weight is the optimized loading to have an enhanced therm...
متن کاملFlame retarding epoxy composites with poly(phosphazene-co-bisphenol A)-coated boron nitride to improve thermal conductivity and thermal stability
Based on the template-induced self-assembly characteristic of cyclomatrix polyphosphazene micro– nanometer materials, novel poly(cyclotriphosphazene-co-bisphenol A)-coated boron nitride (PCB-BN) was designed and synthesized by in situ condensation polymerization on the surfaces of boron nitride (BN) particles using the reaction of hexachlorocyclotriphosphazene (HCCP) with bisphenol A (BPA). It ...
متن کاملSPECIAL ISSUE: EARLY CAREER SCHOLARS IN MATERIALS SCIENCE In situ synthesis of cold-rollable aluminum–aluminum nitride composites via arc plasma-induced accelerated volume nitridation
Our study proposes in situ synthesis of cold-rollable aluminum nitride (AlN) reinforced aluminum matrix composites with attractive thermal properties via arc plasma-induced accelerated volume nitridation (APAVN). Within three minutes of repeated APAVN using commercial nitrogen gas, volume fraction of AlN increased up to 40 vol%, which is the highest value ever reported by in situ nitridation of...
متن کامل