Handling Qualities Evaluations of Unmanned Aircraft Systems
نویسنده
چکیده
منابع مشابه
Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE)
This paper proposes a switching adaptive control for trajectory tracking of unmanned aircraft systems. The switching adaptive control method is designed to overcome the wind disturbance and achieve a proper tracking performance for control systems. In the suggested system, the wind disturbance is regarded as a finite set of uncertainties; a controller is designed for each uncertainty, and a per...
متن کاملNeural Adaptive Flight Control Testing on an Unmanned Experimental Aerial Vehicle
Unmanned Aerial Vehicles have demonstrated potential as being effective platforms for supporting scientific and exploratory missions. They are capable of performing long endurance flights, and reaching remote areas that may be too dangerous for humans. As their role and types of missions expand, challenges are presented which require onboard systems to have increasingly higher levels of intelli...
متن کاملHandling Qualities Evaluation of Xv-15 Noise Abatement Landing Approaches Using a Flight Simulator
A piloted simulation experiment was conducted in the Vertical Motion Simulator to evaluate the handling qualities of noise abatement approach procedures for a civil tiltrotor. Approach and landing procedures flown on the XV-15 tiltrotor research aircraft were evaluated in the simulator by a larger pilot population. The impact on handling qualities of attitude stabilization control responseand w...
متن کاملIn-Trim Flight Investigations of a Conceptual Fluidic Thrust-Vectored Unmanned Tail-Sitter Aircraft
The feasibility of using a stand alone Fluidic Thrust-Vectoring (FTV) system for the purpose of longitudinal trim of an unmanned aerial vehicle is the focus of the research presented in this paper. Since the fluidic thrust vectoring requires high pressure secondary air to deflect the engine exhaust gases, this research also provides an analytical toolset for preliminary sizing of a suitable sec...
متن کاملAircraft Design Optimization with Multidisciplinary Performance Criteria
By minimizing a cost function consisting of both conventional performance criteria and a measure of aircraft handling qualities, a design with maximum performance for a specified level of handling can be achieved. Handling qualities are measured using a quadratic cost function similar to that used in the design of optimal feedback control systems. This function is proportional to the difference...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015