Mechanical behaviour of Fe-C alloys during phase transformations
نویسندگان
چکیده
The mechanical behaviour of Fe-C aiioys have been determined in their phase transformation ranges during isothermal or anisothermal transformations. Two models an analytical model and a fii te element model have been used in order to calculate the behaviour of the material. Considering a macroscopic scale, these models show that the mechanical behaviour can be well described when an additional deformation, i. e. the transformation plasticity deformation, is considered.
منابع مشابه
Adaptive Tunable Vibration Absorber using Shape Memory Alloy
This study presents a new approach to control the nonlinear dynamics of an adaptive absorber using shape memory alloy (SMA) element. Shape memory alloys are classified as smart materials that can remember their original shape after deformation. Stress and temperature-induced phase transformations are two typical behaviors of shape memory alloys. Changing the stiffness associated with phase tran...
متن کاملInfluence of heat generation on the phase transformations and impact responses of composite plates with embedded SMA wires
In the present research, in contrast to the available papers, not only the superelasticity but also the shape memory effects are taken into account in determination of the impact responses. At the same time, in addition to modifying Brinson’s model for the shape memory alloys (SMAs), to include new parameters and loading events, and Hertz contact law, distributions of the SMA phases are conside...
متن کاملThe CharaCTerizaTion of Phase TransformaTions in raPidly solidified al-fe and Cu-fe alloys Through measuremenTs of The eleCTriCal resisTanCe and dsC
Many methods exist for the analysis and for the characterization of the phase transformations of the rapidly solidified alloys, which are also described in the literature [1 3]. frequently used methods are the scanning electron microscopy (sEM), transmission electron microscopy For the characterization of the phase transformations in the alloys during the heat treatment the various methods of t...
متن کاملStructural Characterisation and Mechanical FE Analysis of Conventional and M-Wire Ni-Ti Alloys Used in Endodontic Rotary Instruments
The purpose of this study is to understand how the M-Wire alloy conditions the mechanical flexibility of endodontic rotary files at body temperature.Two different rotary instruments, a Profile GT 20/.06 and a Profile GT Series X 20/.06, were selected due to their geometrical similarity and their different constituent alloy. GT series X files are made from M-Wire, a Ni-Ti alloy allegedly having ...
متن کاملCharacterization of Low-Symmetry Structures from Phase Equilibrium of Fe-Al System—Microstructures and Mechanical Properties
Fe-Al intermetallic alloys with aluminum content over 60 at% are in the area of the phase equilibrium diagram that is considerably less investigated in comparison to the high-symmetry Fe₃Al and FeAl phases. Ambiguous crystallographic information and incoherent data referring to the phase equilibrium diagrams placed in a high-aluminum range have caused confusions and misinformation. Nowadays une...
متن کامل