Both separation and eccentricity can limit precise position judgements: a reply to Morgan and Watt.
نویسندگان
چکیده
Weber's law is ubiquitous in position judgements. In a variety of position acuity tasks, the position threshold is proportional to the separation of the reference features. Recently, we (Klein & Levi, 1987; Levi, Klein & Yap, 1988) suggested that two sensory processes may serve to limit position acuity, and thus contribute to Weber's law for position. One is the target separation, and the other is the target eccentricity. In order to test this idea, we pitted separation against eccentricity by measuring spatial interval discrimination thresholds on an iso-eccentric arc (Levi et al., 1988). Over a 5-fold range of separations, we found that thresholds were independent of separation, and concluded that at large separations, eccentricity can limit precise position judgements. In the preceding article, Morgan and Watt (1989) have questioned this conclusion, and have shown that the effects of eccentricity are small in an arc length discrimination task. In the present article, we: (i) address the objections raised by Morgan and Watt; (ii) show that our data and 2-mechanism model are consistent with many previous studies; and (iii) show that Morgan and Watt's task is inherently difficult, so that rather than tapping the sensory limits imposed by the target eccentricity, performance on the arc length task is constrained by the cognitive demands of the task, or by the difficulty of reconstruction. In contrast, the measurement of chord length (spatial interval discrimination on an iso-eccentric arc) can be simply done by calculating the distance between the endpoints. Thus, at large separations, thresholds for the chord length judgements are much lower than those of Morgan and Watt, and are proportional to the eccentricity of the targets.
منابع مشابه
The role of separation and eccentricity in encoding position.
We measured two- and three-line spatial interval and alignment thresholds for a wide range of separations and eccentricities. In order to avoid confounding the role of separation and eccentricity, the test lines were presented on iso-eccentric arcs, with radii between 0.625 and 10 deg. The iso-eccentric paradigm allows separation to be varied over a large range while holding eccentricity consta...
متن کامل"Weber's law" for position: unconfounding the role of separation and eccentricity.
Bisection thresholds are approximately proportional to the separation/eccentricity of the targets. This "Weber's law" for position has been invoked over the past century. It is the separation of the reference targets, or their eccentricity which determines the threshold? In previous studies separation and eccentricity are confounded. In the present report we have pitted separation against eccen...
متن کاملDisentangling the Role of Spatial Scale, Separation and Eccentricity in Weber's Law for Position
Factors underlying Weber's law for position were investigated by measuring spatial interval discrimination accuracy for spectrally narrow-band stimuli. These stimuli were positioned around an iso-eccentric arc in order to allow separation and eccentricity to be varied independently. We find that Weber's law occurs at individual spatial scales, and holds true not just for stimuli positioned eith...
متن کاملEye position sense contributes to the judgement of slant
We measured monocular judgements of the slant of a cube face while varying eye position in the absence of stereoscopic and external lighting cues. Errors were found to be small, only 10% on average of the cube's eccentricity. Two factors appear to have contributed approximately equally to this error: an underestimate of cube slant as seen by the eye and an underestimate of eye position. When pr...
متن کاملDynamic Performance Prediction of Brushless Resolver
A mathematical model based on d-q axis theory and dynamic performance characteristic of brushless resolvers is discussed in this paper. The impact of rotor eccentricity on the accuracy of position in precise applications is investigated. In particular, the model takes the stator currents of brushless resolver into account. The proposed model is used to compute the dynamic and steady state e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Vision research
دوره 29 10 شماره
صفحات -
تاریخ انتشار 1989