Dielectric-lined cylindrical metallic THz waveguides: mode structure and dispersion.
نویسندگان
چکیده
Thin dielectric layers deposited on the inner surface of hollow cylindrical metallic waveguides for Terahertz (THz) waves reduce transmission losses below 1 dB/m. Impact of the dielectric layer on the waveguide dispersion is experimentally investigated by near-field mapping of guided short THz pulses at the input and the output of the waveguide. We obtain dispersion characteristics for the low-loss waveguide modes, the linearly-polarized HE(11) mode and the TE(01) mode, and compare the experimental results to the metallic waveguide dispersion. The additional dispersion due to the dielectric layer is found to be small for the HE(11) mode and the phase velocity is primarily determined by the waveguide radius.
منابع مشابه
Silver-Coated Teflon Tubes for Waveguiding at 1–2 THz
Realization of single-mode low-loss waveguides for 1.0–2.0 THz remains a challenging problem due to large absorption in most dielectrics and ohmic losses in metals. To address this problem, we investigate dielectric-lined hollow metallic waveguides fabricated by coating 1-mm diameter 38-μm-thick polytetrafluoroethylene tubes with silver. These waveguides support a hybrid HE11 mode, which exhibi...
متن کاملTerahertz wave transmission in flexible polystyrene-lined hollow metallic waveguides for the 2.5-5 THz band.
A low-loss and low-dispersive optical-fiber-like hybrid HE₁₁ mode is developed within a wide band in metallic hollow waveguides if their inner walls are coated with a thin dielectric layer. We investigate terahertz (THz) transmission losses from 0.5 to 5.5 THz and bending losses at 2.85 THz in a polystyrene-lined silver waveguides with core diameters small enough (1 mm) to minimize the number o...
متن کاملEnhancement of optics-to-THz conversion efficiency by metallic slot waveguides.
A metallic slot waveguide, with a dielectric strip embedded within, is investigated for the purpose of enhancing the optics-to-THz conversion efficiency using the difference-frequency generation (DFG) process. To describe the frequency conversion process in such lossy waveguides, a fully-vectorial coupled-mode theory is developed. Using the coupled-mode theory, we outline the basic theoretical ...
متن کاملDielectric-gap-metal waveguides for THz low-loss propagating wave with subwavelength mode width
For a good THz waveguide, both low propagating loss and small mode width are usually very important. However, the high ohmic loss of metals and the high absorption loss of dielectric materials result in that it still remains a challenge to obtain the two capabilities at the same time. In this paper, planar dielectric-gap-metal (DGM) waveguides are presented to guide THz wave. According to the d...
متن کاملLow-loss terahertz ribbon waveguides.
The submillimeter wave or terahertz (THz) band (1 mm-100 microm) is one of the last unexplored frontiers in the electromagnetic spectrum. A major stumbling block hampering instrument deployment in this frequency regime is the lack of a low-loss guiding structure equivalent to the optical fiber that is so prevalent at the visible wavelengths. The presence of strong inherent vibrational absorptio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 18 3 شماره
صفحات -
تاریخ انتشار 2010