Statistical analysis for the manufacturing of multi-strip patterns by roll-to-roll single slot-die systems
نویسندگان
چکیده
Roll-to-roll (R2R) slot-die coating systems are mostly devoted to the mass manufacture of printed electronics. This study examined the correlation among the operating conditions, thickness, and width of the patterned strip fabricated by the R2R slot-die system. A full factorial experiment was conducted to screen for effective parameters. The velocity of a moving substrate was found to be the most dominant parameter affecting the thickness and width of the patterned strips. The flow ratio of the supply to the slot-die, and gap between substrate and slot-die did not affect the width of the strip, but affected the thickness; therefore, the flow ratio and gap can be employed for the independent patterning of thickness against width. In addition, it was proposed to determine the R2R process conditions, such as gap, velocity, and flow ratio for the desired thickness and width of the patterned strips. & 2013 Elsevier Ltd. All rights reserved.
منابع مشابه
Analytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کاملAnalytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کاملPrediction of Work Roll Initial Crown according to Desired Strip Profile in Hot Rolling
The final hot strip profile is a superposition of the roll initial crown, the roll bending and flattening crown, the roll wearing crown and the roll thermal crown. In this research, linear regression models are proposed to predict the roll force, the roll wearing crown and the roll thermal crown using experimental data provided by Mobarake Steel Complex (MSC). The short beam theory based on ela...
متن کاملRapid Prototyping of Slot Die Devices for Roll to Roll Production of EL Fibers
There is a growing interest in fibers supporting optoelectrical properties for textile and wearable display applications. Solution-processed electroluminescent (EL) material systems can be continuously deposited onto fiber or yarn substrates in a roll-to-roll process, making it easy to scale manufacturing. It is important to have precise control over layer deposition to achieve uniform and reli...
متن کاملAnalytical and Numerical Investigation of Four-roll Bending
Four-roll bending process is usually used for manufacturing of seamed thick-walled and thin-walled cylinders. Due to complexity of this process, the analytical solution of plate bending in this process has not been developed completely. The existence of friction and multi-step processing makes it more difficult. Investigation of four-roll bending process using analytical and numerical methods i...
متن کامل