Interfacial and Transport Phenomena in Closed-cell Foams

نویسنده

  • Laurent Pilon
چکیده

Pilon, Laurent. Ph.D., Purdue University, December, 2002. Interfacial and Transport Phenomena in Closed-Cell Foams. Major Professor: Raymond Viskanta. The present study can be divided in three different parts: (1) foam dynamics, (2) thermal radiation transfer through foams and semitransparent media containing bubbles, and (3) bubble transport in three-dimensional liquid laminar flow. The first part aims at better understanding and predicting (i) the transient growth, (ii) the steady state foam thickness, and (iii) the onset of formation of foams produced by injecting bubbles in a column containing a foaming liquid at rest. First, a model for the transient growth based on the mass conservation equation for the gas phase is proposed. Second, the governing equation for the transient foam thickness has been non-dimensionalized, and two dimensionless numbers have been identified to describe the formation and stability of liquid foams at steady state. Finally, the model for predicting the onset of foaming is derived from the one-dimensional drift-flux model. Experimental data have been collected from the literature and cover a wide range of experimental conditions and thermophysical properties. The models predictions were systematically compared with available experimental data and show very good agreement. The dissertation presents a general formulation of the radiation characteristics of semitransparent media containing gas bubbles. Sample calculations for the spectral radiation characteristics of soda-lime silicate glass containing bubbles are discussed. Results clearly show that the presence of bubbles strongly affects the radiation characteristics of the semitransparent media containing entrapped gas bubbles, particularly if bubbles, void fractions, and spectral absorption coefficient of the continuous phase are small. Spectral bi-directional transmittance and reflectance of fused quartz sam-

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Fe additive on plastic deformation for crush-boxes with closed-cell metal foams, Part I: Al-composite foam compression response

AbstractIn this paper, we investigate effect of Fe–intermetallic compounds on plastic deformation of closed-cell composite Aluminum Foam as filler of thin-walled tubes. However, deformation of the Aluminum foam-filled thin-walled tubes as crushed-box will be presented in Part (II). Composite foams of AlSi7SiC3 and AlSi7SiC3-(Fe) as closed cell were synthesized by powder metallurgy foaming metho...

متن کامل

Investigation in to Properties of Polyurethane Closed Cell by High Loading of SiO2 Nanoparticles

In this research the composition of polyurethane closed cell (PUCC) with two different concentrations of SiO2 nanoparticles (1.0 and 2.0 wt%) have been prepared. Optical microscopy and SEM imaging, watering uptake, FTIR and Raman spectroscopy of the synthesized samples were carried out. The optical microscopy imaging of samples showed differences in the appearance of matrix produ...

متن کامل

Manufacture of Aluminum Closed-cell Foam by ARB process using CaCO3 as the blowing agent

Metal porous foams have been eliciting much interest in recent years due to their high capacity of energy absorption. The characteristics of the pores in these materials play an important role on their energy absorption capability and other properties. This study reports the fabrication of aluminum closed-cell foams by accumulative roll-bonding (ARB) technique using calcium carbonate (CaCO3) as...

متن کامل

The Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response

The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

متن کامل

Three-dimensional modeling of transport phenomena in a planar anode-supported solid oxide fuel cell

In this article three dimensional modeling of a planar solid oxide fuel cell (SOFC) was investigated. The main objective was to attain the optimized cell operation. SOFC operation simulation involves a large number of parameters,   complicated equations, (mostly partial differential equations), and a sophisticated simulation technique; hence, a finite element method (FEM) multiphysics approach ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005