A multi-technique surface study of the mercury(II) chalcogenide ion-selective electrode in saline media.

نویسندگان

  • Roland De Marco
  • Bobby Pejcic
  • Kathryn Prince
  • Arie van Riessen
چکیده

X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), rotating disc electrode-electrochemical impedance spectroscopy (RDE-EIS) and synchrotron radiation-grazing incidence X-ray diffraction (SR-GIXRD) have been used to study the response mechanism of the mercury(II) chalcogenide ion-selective electrode (ISE) in saline media. XPS and SIMS have shown that the chalcogenide surface is poisoned by silver chloride, or a mixture of silver halides, on continuous exposure to synthetic and real seawater. Significantly, the in-situ SR-GIXRD study demonstrated that electrode fouling in synthetic seawater is linked to the formation of poorly crystalline or amorphous silver chloride, and that the low level of free mercury(II) in a calibration buffer (i.e., 10(-14) M) is able to undergo metathesis with silver(II) sulfide in the membrane generating mercury(II) sulfide. Significantly, the results of this detailed surface study have shown that silver chloride fouling of the electrode is ameliorated in real seawater comprising natural organic ligands, and this has been attributed to the peptization of silver chloride by the surfactant-like nature of seawater ligands at pH 8. RDE-EIS aging studies have revealed that the chalcogenide membrane experiences a sluggish charge transfer reaction in seawater, and contrary to a previous report for a static electrode, the seawater matrix does not passivate the RDE. The results of this XPS, SIMS, RDE-EIS and SR-GIXRD study have elucidated the response mechanism of the mercury(II) ISE in saline media.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

An Electrochemical Sensor Based on Novel Ion Imprinted Polymeric Nanoparticles for Selective Detection of Lead Ions

In this study, the novel surface ion-imprinted polymer (IIP) particles were prepared and applied as a electrode modifier in stripping voltammetric detection of lead(II) ion. A carbon paste electrode (CPE) modified with IIP nanoparticles and multi-walled carbon nanotubes (MWCNTs) was used for accumulation of toxic lead ions. Various factors that govern on electrochemical signals including carbon...

متن کامل

Sn (II) Ion- Selective Membrane Electrode based on Dibenzo-18-Crown-6

We found that dibenzo-18-crown-6 (DB18C6) can be used as an ionophore to make a tin (II)-ionselectivemembrane electrode. The electrode exhibits a near Nernstian response for Sn2+ ions over aconcentration range from 1.0× 10-6 – 1.0× 10-2 M with a slope of 27.5 ± 0.6 mV per concentration decadein an acidic solution (pH=1). The limit of detection was 8.0× 10-7 M. It has a response time of < 20s an...

متن کامل

Electrochemical impedance spectroscopy and X-ray photoelectron spectroscopy study of the response mechanism of the chalcogenide glass membrane iron(III) ion-selective electrode in saline media.

The response mechanism of the iron(III) chalcogenide glass membrane ion-selective electrode (ISE) in saline media has been studied using electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS). EIS equivalent circuits and XPS surface compositions for the FeIII ISE are consistent with the presence of two surface films probably comprising a outer surface layer (OSL...

متن کامل

Uultra-trace determination of cadmium (II) in aqueous environmental samples by a new ion selective electrode based on nefazodone and 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid

Background and Objective: Cadmium is a potential environmental contaminant that causes adverse effects on the environment and the health of living organisms. Therefore, designing a simple and economic technique for its determination is very important. In this respect, a potentiometric sensor based on nefazodone as the ionophore and [BMIM]PF6 as the ionic additive were developed for the determin...

متن کامل

Cu(II) Ion- Selective Membrane Electrode Based on bis(N-salicylidene-3,3'-diamino diphenyl) sulfone

In order to study the Cu(II) ion selective electrode, an optimized membrane was prepared by mixing of 30 mg of PVC powdered, 5 mg of considered ionophore, 60 mg of plasticizer and 5 mg of additive. The sensor showed a near Nernstian response for Cu(II) ions over a concentration range from 1.0×0-6 –1.0×0-2 M with a slope of 28.90.5 mV per concentration decade with a working pH range of 3.5-6.3. ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The Analyst

دوره 128 6  شماره 

صفحات  -

تاریخ انتشار 2003