Submerged microcontact printing (SmuCP): an unconventional printing technique of thiols using high aspect ratio, elastomeric stamps.
نویسندگان
چکیده
A technique for microcontact printing of thiols in liquid media is presented. Elastomeric poly(dimethyl siloxane) stamps are used to pattern gold surfaces with thiol-based self-assembled monolayers. The liquid (water in this case) has been used as an incompressible support and, advantageously, also acts as a medium in which alkylthiol ink molecules are poorly miscible. Consequently, we have been able to produce patterned thiol monolayers using stamps with aspect ratios unsuitable for conventional microcontact printing (i.e., 15:1) and present evidence to suggest that it is possible to use stamps with aspect ratios of up to 100:1.
منابع مشابه
Micro/nanopatterning of proteins via contact printing using high aspect ratio PMMA stamps and nanoimprint apparatus.
Micro- and nanoscale protein patterns have been produced via a new contact printing method using a nanoimprint lithography apparatus. The main novelty of the technique is the use of poly(methyl methacrylate) (PMMA) instead of the commonly used poly(dimethylsiloxane) (PDMS) stamps. This avoids printing problems due to roof collapse, which limits the usable aspect ratio in microcontact printing t...
متن کاملNon-Photolithographic Methods for Fabrication of Elastomeric Stamps for Use in Microcontact Printing
Thispaperdescribes severalmethods that generatepatterned relief structures for casting the elastomeric stamps required in microcontact printing (μCP). The relief structures include the following: (1) patterns etched in thin films of silver (200 nm thick) with printed SAMs of hexadecanethiolate as resists; (2) patterned polymeric structures assembled on the surface of a thin film of silver (or g...
متن کاملAn alternative method for fabricating microcontact printing stamps
In this paper, we describe the development of microcontact printing stamps from photopatternable silicone. The photopatternability of this material enables convenient and fast stamp fabrication, and allows rapid patterning of substrates for culturing biological cells. Microcontact printing stamps made of the photopatternable silicone with linewidths as small as 2 lm were fabricated and reliable...
متن کاملCatalytic microcontact printing on chemically functionalized H-terminated silicon.
We report a novel inkless soft lithographic fabrication protocol that permits uniform parallel patterning of hydrogen-terminated silicon surfaces using catalytic elastomeric stamps. Pattern transfer is achieved catalytically via reaction between sulfonic acid moieties covalently bound to an elastomeric stamp and a Boc-functionalized SAM grafted to passivated silicon. The approach represents the...
متن کاملProtein patterning by microcontact printing using pyramidal PDMS stamps
Micro-contact printing, μCP, is a well-established soft-lithography technique for printing biomolecules. μCP uses stamps made of Poly(dimethylsiloxane), PDMS, made by replicating a microstructured silicon master fabricated by semiconductor manufacturing processes. One of the problems of the μCP is the difficult control of the printing process, which, because of the high compressibility of PDMS,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Langmuir : the ACS journal of surfaces and colloids
دوره 21 26 شماره
صفحات -
تاریخ انتشار 2005