To Minimize Current Distribution Error (cde) in Parallel of Non Identic Dc-dc Converters Using Adaptive Neuro Fuzzy Inference System
نویسندگان
چکیده
A control system for non identical dc-dc converters using Adaptive Neuro Fuzzy Inference System (ANFIS) is presented. The converters are connected in parallel and have a non identical inductance value, L1≠L2≠L3, with 10% tolerance. The objective of control system is to balance the output current of each converter. One of converters is used as reference. The current error, which is subtraction of output current between the reference and other converters, is used as the ANFIS input. Therefore, it requires 2 ANFIS systems when 3 converters are in parallel. Each ANFIS has 5 membership functions. Simulations show that a system with 48 volt and various load resistances (from 10Ω to 0.75Ω) performs Current Distribution Error under 0.1%.
منابع مشابه
Decreasing Starting Current for Separate Excited DC Motor using ANFIS Controller
Today, DC motors is still being used globally due to their easy speed controllability. In this article, an Adaptive Neuro-Fuzzy Inference System (ANFIS) controller is designed for DC motors. The main purpose of performing such task is to reduce the DC motor starting current and deleting the ripple current during starting time in considering control parameters such as: rise time, settling time, ...
متن کاملA New Intelligent Controller for Parallel DC/DC Converters
In this paper, the immune controller, is used to control the paralleled DC-DC converters. A PID controller is first applied and its coefficient is optimized using an intelligent (PSO) algorithm. Immune controller is then added to PID controller and an immune PID controller is formed. Two methods have been suggested to determine non-linear behavior of immune controller. In the first method, an e...
متن کاملVoting Algorithm Based on Adaptive Neuro Fuzzy Inference System for Fault Tolerant Systems
some applications are critical and must designed Fault Tolerant System. Usually Voting Algorithm is one of the principle elements of a Fault Tolerant System. Two kinds of voting algorithm are used in most applications, they are majority voting algorithm and weighted average algorithm these algorithms have some problems. Majority confronts with the problem of threshold limits and voter of weight...
متن کاملVoting Algorithm Based on Adaptive Neuro Fuzzy Inference System for Fault Tolerant Systems
some applications are critical and must designed Fault Tolerant System. Usually Voting Algorithm is one of the principle elements of a Fault Tolerant System. Two kinds of voting algorithm are used in most applications, they are majority voting algorithm and weighted average algorithm these algorithms have some problems. Majority confronts with the problem of threshold limits and voter of weight...
متن کاملAn Intelligent Algorithm based Controller for Multiple Output DC-DC Converters with Voltage Mode Weighting Factor
Multiple output DC-DC converters are widely used in many applications such as aerospace, industrial and medical equipments. The purpose of this paper is to present an intelligent control system for the multiple output DC-DC converters. In order to perform this purpose, a double ended forward DC-DC converter with three output voltages (+5 V/ 50W, +15 V/ 45W and -15 V/ 15W) is considered and anal...
متن کامل