Wirelessly controllable inflated electroactive polymer (EAP) reflectors
نویسندگان
چکیده
Inflatable membrane reflectors are attractive for deployable, large aperture, lightweight optical and microwave systems in micro-gravity space environment. However, any fabrication flaw or temperature variation may results in significant aberration of the surface. Even for a perfectly fabricated inflatable membrane mirror with uniform thickness, theory shows it will form a Hencky curve surface rather than the desired parabolic or spherical surface. Precision control of the surface shape of extremely flexible membrane structures is a critical challenge for the success of this technology. Wirelessly controllable inflated reflectors made of electroactive polymers (EAP) are proposed in this paper. A finite element model was configured to predict the behavior of the inflatable EAP membranes under pre-strains, pressures and distributed electric charges on the surface. To explore the controllability of the inflatable EAP reflectors, an iteration algorithm was developed to find the required applied electric field distribution for correcting the aberration of a Hencky curve to the desired parabolic curve. The correction capability of the reflectors with available EAP materials was explored numerically and is presented in this paper. Keyword: Electroactive polymer, EAP, inflatable membrane mirror, thin film antenna, controllable reflector.
منابع مشابه
Numerical modeling of single-layer electroactive polymer mirrors for space applications
Thin-film mirrors are attractive for large apertures, lightweight optical systems and microwave antennas operating in micro-gravity environments. The surface shape of these deployable thin film structures requires control to a precision range that depends on the specific applications. For optical systems, such surfaces need to be deployed and refined in the range of sub-microns. Electroactive p...
متن کاملElectroactive Polymer Actuator design for space applications
In order to achieve a distributed actuation in robotics and automation a novel soft actuator technology is being sought worldwide. One of the candidate technologies is based on Electroactive Polymers (EAP). The research to be done in the field of EAP actuators should cover four issues: material improvement, characterization and modeling, actuator design, and applications simulation. Advances on...
متن کاملElectro-mechanical modelling and identification of electroactive polymer actuators as smart robotic manipulators
Electroactive polymer (EAP) actuators, also known as artificial muscles, have remarkable properties such as low energy consumption, low weight, low actuation foot-print, compliance and bio-compatibility. Several methodologies have been proposed to model and analyse their quasi-static bending behaviour with negligible attention paid to their dynamic behaviour. We, therefore, report on an enhance...
متن کاملModification of Conductivity and of Mechanical Properties of Electroactive Polymer (EAP) Thin Films by Titanium Ion Implantation
متن کامل
Directions for development of the field of Electroactive Polymer (EAP)
In last few years, the rate of development and advances in the field of EAP has accelerated significantly and it is increasingly getting closer to the point of finding them used in commercial products. Substantial development has been reported in the understanding of their drive mechanisms and the parameters that control their electro-activation behavior. Further, efforts are being made to deve...
متن کامل