A computer modelling study of the uptake, structure and distribution of carbonate defects in hydroxy-apatite.
نویسندگان
چکیده
Computer modelling techniques have been employed to qualitatively and quantitatively investigate the uptake and distribution of carbonate groups in the hydroxyapatite lattice. Two substitutional defects are considered: the type-A defect, where the carbonate group is located in the hydroxy channel, and the type-B defect, where the carbonate group is located at the position of a phosphate group. A combined type A-B defect is also considered and different charge compensations have been taken into account. The lowest energy configuration of the A-type carbonate has the O-C-O axis aligned with the channel in the c-direction of the apatite lattice and the third oxygen atom lying in the a/b plane. The orientation of the carbonate of the B-type defect is strongly affected by the composition of the apatite material, varying from a position (almost) flat in the a/b plane to being orientated with its plane in the b/c plane. However, Ca-O interactions are always maximised and charge compensating ions are located near the carbonate ion. When we make a direct comparison of the energies per substitutional carbonate group, the results of the different defect simulations show that the type-A defect where two hydroxy groups are replaced by one carbonate group is energetically preferred (DeltaH = -404 kJ mol(-1)), followed by the combined A-B defect, where both a phosphate and a hydroxy group are replaced by two carbonate groups (DeltaH = -259 kJ mol(-1)). The type-B defect, where we have replaced a phosphate group by both a carbonate group and another hydroxy group in the same location is energetically neutral (DeltaH = -1 kJ mol(-1)), but when the replacement of the phosphate group by a carbonate is charge compensated by the substitution of a sodium or potassium ion for a calcium ion, the resulting type-B defect is energetically favourable (DeltaH(Na) = -71 kJ mol(-1),DeltaH(K) = -6 kJ mol(-1)) and its formation is also promoted by A-type defects present in the lattice. Our simulations suggest that it is energetically possible for all substitutions to occur, which are calculated as ion-exchange reactions from aqueous solution. Carbonate defects are widely found in biological hydroxy-apatite and our simulations, showing that incorporation of carbonate from solution into the hydroxyapatite lattice is thermodynamically feasible, hence agree with experiment.
منابع مشابه
CATION UPTAKE PROPERTIES OF CALCIUM ALUMINOSILICATE
In this study, the effect of different parameters such as time and temperature of calcination and milling on the formation of calcium aluminosilicates was investigated. Raw materials used in this study were calcium carbonate and kaolin in high purity. Powder X-ray diffraction patterns were obtained from all samples after heat treatment at various temperatures and times. To study the microstruct...
متن کاملبررسی محیط تشکیل افقهای فسفریتی کانسارهای کوه سفید و بناری با استفاده از شواهد کانیشناسی
Simple folded Zagros has several phosphate horizons with the Cretaceous – Tertiary ages that are present as inter-layer in Pabdeh and Gurpy formations. Therefore, study of combination, texture of mineralogy and determination of genesis of marine phosphate of Zagros basin during Eocene – Oligocene is important. In this study, 28 samples were collected from phosphate Kuhe-e- Sefid and Kuh-e- Lar ...
متن کاملModelling of Correlated Ordinal Responses, by Using Multivariate Skew Probit with Different Types of Variance Covariance Structures
In this paper, a multivariate fundamental skew probit (MFSP) model is used to model correlated ordinal responses which are constructed from the multivariate fundamental skew normal (MFSN) distribution originate to the greater flexibility of MFSN. To achieve an appropriate VC structure for reaching reliable statistical inferences, many types of variance covariance (VC) structures are considered ...
متن کاملSynthesis of nano-sized ceria (CeO2) particles via a cerium hydroxy carbonate precursor and the effect of reaction temperature on particle morphology
Cerium oxide (CeO2) or ceria has been shown to be an interesting support material for noble metals in catalysts designed for emission control, mainly due to its oxygen storage capacity. Ceria nanoparticles were prepared by precipitation method. The precursor materials used in this research were cerium nitrate hexahydrate (as a basic material), potassium carbonate and potassium hydroxide (as pre...
متن کاملSynthesis and Characterization of Highly Porous TiO2 Scaffolds for Bone Defects
The purpose of this study was to fabricate and investigate the highly porous structure using titanium dioxide, which is a candidate for bone defect repairing. For this purpose, TiO2 scaffolds were synthesized using titanium butoxide, Pluronic F127 surfactant, and polyurethane foam blocks. Therefore, a colloid includes titanium butoxide and F127 and the polyurethane foams were immersed in it. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Biomaterials
دوره 27 9 شماره
صفحات -
تاریخ انتشار 2006