Generalized equivalent circuits for mixed conductors: silver sulfide as a model system
نویسندگان
چکیده
ABSTRACT The generalized equivalent circuit for Hebb-Wagner polarization in the frequency domain proposed by Jamnik and Maier (J Electrochem Soc 146:4183, 1999) includes the space-charge polarization that was previously neglected. In the present work, using a self-coded Fortran program, the completely generalized equivalent circuit is successfully applied to a mixed conducting silver sulfide with an AgI electrode that suppresses the electronic flow. A whole set of fit parameters, such as geometric capacitance, partial conductivities, chemical capacitance or diffusivity, and the blocking and shunting characteristics of electrodes are independently but self-consistently obtained over a range of silver activities, as controlled by a galvanic cell. The interfacial capacitance was found to be much larger than the diffuse space-charge double-layer capacitance and was thus ascribed to the adsorption capacitance at the core of the interface, which should be connected in parallel with the space-charge double-layer polarization. Two simplified equivalent circuits were shown to be good approximations for the spectra at the extreme low and high silver activity, respectively. GRAPHICAL ABSTRACT
منابع مشابه
Ink-jetted Silver/Copper conductors for printed RFID applications
Low-resistance printed conductors are crucial for the development of ultra-low cost electronic systems such as radio frequency identification tags. Low resistance conductors are required to enable the fabrication of high-Q inductors, capacitors, tuned circuits, and interconnects. Furthermore, conductors of appropriate workfunction are also required to enable fabrication of printed Schottky diod...
متن کاملModeling and Simulation of Substrate Noise in Mixed-Signal Circuits Applied to a Special VCO
The mixed-signal circuits with both analog and digital blocks on a single chip have wide applications in communication and RF circuits. Integrating these two blocks can cause serious problems especially in applications requiring fast digital circuits and high performance analog blocks. Fast switching in digital blocks generates a noise which can be introduced to analog circuits by the common su...
متن کاملEfficient Analysis of Plasmonic circuits using Differential Global Surface Impedance (DGSI) Model
Differential global surface impedance (DGSI) model, a rigorous approach, has been applied to the analysis of three dimensional plasmonic circuits. This model gives a global relation between the tangential electric field and the equivalent surface electric current on the boundary of an object. This approach helps one bring the unknowns to the boundary surface of an object and so avoid volumetric...
متن کاملSolution Processed Silver Sulfide Thin Films for Filament Memory Applications
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post on servers or to redistribute to lists, requires prior specific permission....
متن کاملEffect of Conductor Surface Roughness and Geometry on Microwave Loss
Low Temperature Co-fired Ceramic (LTCC) technology is being used for various high frequency applications such as T/R modules for radar, bluetooth communication modules, LAN switches, and automotive radar. One of the key properties of the electronic packages for these applications is microwave loss. LTCC metallizations are typical thick film conductors. Conventional thick film technology has rel...
متن کامل