RRWL: Round Robin-Based Wear Leveling Using Block Erase Table for Flash Memory
نویسندگان
چکیده
In this letter, we propose a round robin-based wear leveling (RRWL) for flash memory systems. RRWL uses a block erase table (BET), which is composed of a bit array and saves the erasure histories of blocks. BET can use one-to-one mode to increase the performance of wear leveling or one-to-many mode to reduce memory consumption. However, one-to-manymode decreases the accuracy of cold block information, which results in the lifetime degradation of flash memory. To solve this problem, RRWL consistently uses one-to-one mode based on round robin method to increase the accuracy of cold block identification, with reduced memory size of BET, like in one-to-many mode. Experiments show that RRWL increases the lifetime of flash memory by up to 47% and 14%, compared with BET and HaWL, respectively. key words: flash memory, wear leveling, hidden cold block problem, bit array table, block erase table
منابع مشابه
Rejuvenator:A Static Wear Leveling Algorithm for Flash memory
NAND flash memory has the potential to become the storage alternative of the future due to its better performance and low power requirements. However reliability is still a critical issue in using NAND flash memory for large scale enterprise applications. The number of times a block can be reliably erased is limited in a NAND flash memory. A wear leveling algorithm helps to prevent the early we...
متن کاملA Stackable Wear-Leveling Module for Linux-Based Flash File Systems
Flash memory has now become a crucial component in building Linux-based embedded computers. As the overall flash-memory lifetime is concerned with block endurance, wear leveling is needed to evenly erase all blocks. This paper presents a modularized implementation of a wear-leveling algorithm. Our goal is to instantly enable any existing Linux-based flash file systems the ability of wear leveli...
متن کاملPrediction of Elapsed Time based Wear Leveling for NAND Flash Memory in Embedded Systems
In recent years, many storage systems use NAND flash memory increasingly as their secondary storages. NAND flash memory has non-volatile memory characteristics with low power, low latency and high reliability. On the other hand, NAND flash memory has different issue, compared to existing secondary storages, which is the characteristics such as erase-before-write, low endurance and different ope...
متن کاملAMI: An Advanced Endurance Management Technique for Flash Memory Storage Systems
Flash memory is small size, lightweight, shock-resistant, nonvolatile, and consumes little power. Flash memory therefore shows promise for use in storage devices for consumer electronics, mobile computers, wireless devices and embedded systems. However, flash memory cannot be overwritten unless erased in advance. Erase operations are slow that usually decrease system performance and consume pow...
متن کاملAMI: an advanced eEndurance management technique for flash memory storage systems
Flash memory is small size, lightweight, shock-resistant, nonvolatile, and consumes little power. Flash memory therefore shows promise for use in storage devices for consumer electronics, mobile computers, wireless devices and embedded systems. However, flash memory cannot be overwritten unless erased in advance. Erase operations are slow that usually decrease system performance and consume pow...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Transactions
دوره 100-D شماره
صفحات -
تاریخ انتشار 2017