Improvement of the Durability of Heat-treated Wood against Termites

نویسندگان

  • Solafa Salman
  • Marie France Thévenon
  • Anélie Pétrissans
  • Stéphane Dumarçay
  • Kevin Candelier
  • Philippe Gérardin
چکیده

Thermal modification is an attractive alternative to improve the decay durability and dimensional stability of wood. However, thermally modified wood is generally not resistant to termite attacks, limiting the field of application of such materials. One way to overcome this drawback is to combine thermal modification treatment with an additional treatment. One such treatment is the impregnation of a boron derivative associated with appropriate vinylic monomers, which takes advantage of the thermal treatment to polymerise these monomers for boron fixation. Using this strategy, we recently showed that an impregnation of borax (2 or 4% boric acid equivalent) dissolved in a 10% aqueous solution of polyglycerolmethacrylate followed by thermal treatment under nitrogen at 220°C protects wood from both termite and decay degradations, even after leaching. Additionally, wood samples treated with a 10% polyglycerolmethacrylate aqueous solution and subjected to thermal treatment at 220°C presented improved resistance to termites while avoiding boron utilization. Based on these results, we investigate the effect of impregnation with two types of vinylic monomers, which are already used in the presence of boron, followed by thermal treatments at different temperatures. We evaluate termite and decay durability of wood to evaluate if thermal modification associated with light chemical modification could be a solution for utilization of thermally modified materials in termite-infested areas.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Utilization of Temperature Kinetics as a Method to Predict Treatment Intensity and Corresponding Treated Wood Quality: Durability and Mechanical Properties of Thermally Modified Wood

Wood heat treatment is an attractive alternative to improve decay resistance of wood species with low natural durability. However, this improvement of durability is realized at the expense of the mechanical resistance. Decay resistance and mechanical properties are strongly correlated to thermal degradation of wood cells wall components. Mass loss resulting from this degradation is a good indic...

متن کامل

Use of a Short Span Field Test to Evaluate Termite Resistance of Eucalyptus Grandis and Bobgunnia Madagascariensis in a Tropical Environment

Despite being treated with preservatives, the service life of transmission poles and fence posts in the Zambian Copperbelt province is close to fifteen years. However, the service life is only two years for untreated timber, mainly due to termite damage. This short service life is exerting more pressure on an already over-burdened timber resource base. This study used an accelerated field test ...

متن کامل

Performance Characterization of Coatings on Treated-wood

Coating performance is greatly influenced by the properties of the wood substrate. This study was focused on evaluating the performance of coatings on both preservative- and thermally-treated wood. A number of commercially formulated semi-transparent stains Alkyd, Alkyd-Acrylic and PU were applied on four different types of preservative treated and heat-treated wood and their performances were ...

متن کامل

Effects of Heat Treatment on Durability of Merbau Heartwood

Merbau wood has been widely used in outdoor applications. However, it has a disadvantage in that its water-soluble extractives readily leach out and stain adjacent materials. Heat treatment is an efficient technique to solve this problem. In this study, the effects of heat treatment on the durability of merbau heartwood were investigated. Merbau heartwood blocks with and without heat treatment ...

متن کامل

Qualitative and Quantitative Determination of Resistance of Twenty Two Malaysian Commercial Timbers through Subterranean Termite Feeding Behavior

As defined in BS EN 350-1 [1], natural durability is ‘the inherent resistance of wood to attack by wood destroying organisms’. Eaton and Hale [2] defined natural durability or decay resistance as the ability of the Heartwood of any wood species to resist decay. Normally, natural durability is measured by exposing the wood to biological agents such as termites, beetles, fungi and marine borers (...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017