Average Power Reduction Techniques for Multiple-Subcarrier Intensity-Modulated Optical Signals

نویسندگان

  • Roy You
  • Joseph M. Kahn
چکیده

We describe two classes of simple, effective techniques for reducing the average optical power requirement in intensity-modulated optical systems using multiple BPSK or QPSK subcarriers. The first class of techniques involves block coding between the information bits to be transmitted and the symbol amplitudes modulated onto the subcarriers in order to increase the minimum value of the multiple-subcarrier electrical waveform. The second class of techniques involves replacing the fixed dc bias by a bias signal that varies on a symbol-by-symbol basis. These two classes of techniques can be applied separately or in tandem. The reduction in power requirement increases with the number of subcarriers and, with eight subcarriers, can be as high as about 3.6 dB and 3.2 dB with BPSK and QPSK, respectively. The techniques described here are applicable as long as all subcarriers originate from a single transmitter and are symbol-synchronized.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On the average power of multiple subcarrier intensity modulated optical signals: Nehari's problem and coding bounds

Multiple subcarrier modulation (MSM) is an attractive technique for optical wireless communication for high speed applications. The main disadvantage of this scheme is its low average power efficiency which is an analogous problem to the high peak to mean envelope power ratio (PMEPR) of multicarrier signals. In this paper, we consider the achievable average power reduction of MSM signals by usi...

متن کامل

Average Power Reduction Using Time-Varying Bias with Bandlimited Pulses in Multiple-Subcarrier Intensity-Modulated Optical Systems

We present a technique for average power reduction in intensity-modulated optical systems using multiple BPSK or QPSK subcarriers with bandlimited pulses, which are, necessarily, not time-limited. In order to insure the non-negativity of the transmitted intensity signal, we use a time-varying bias signal, which is a baseband pulse-amplitude modulation signal also using these pulses. We focus on...

متن کامل

Transmit power reduction through subcarrier selection for MC-CDMA-based indoor optical wireless communications with IM/DD

This research addresses the issue of average transmit optical power reduction in multi-carrier code division multiple access (MC-CDMA)-based indoor optical wireless communications employing intensity modulation with direct detection. The problem is treated in a novel way by investigating preand post-equalization-based subcarrier selection for transmit power reduction in downlink transmissions. ...

متن کامل

Analysis of Relative Intensity Noise in OSSB/SCM Systems with Multiple In-Line Amplifiers

This paper investigates the performance limitations due to Relative Noise Intensity (RIN) of long haul direct detection optical single side band systems employing subcarrier multiplexed techniques (OSSB/SCM) using in-line optical amplifiers. The influence of fiber nonlinearity, dispersion and loss on the RIN spectrum at fiber output is quantified and validated by simulation. Our results show th...

متن کامل

Upper-bounding the capacity of optical IM/DD Channels with multiple-subcarrier modulation and fixed bias using trigonometric moment space method

We consider the channel capacity of an optical intensity-modulated direct-detection (IM/DD) system using multiple-subcarrier modulation (MSM) with fixed bias. The channel is modeled as an additive white Gaussian noise (AWGN) channel with nonnegative input waveform. The mean of the nonnegative input waveform is the average transmitted optical power. The mean of the waveform during a symbol perio...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2000