Manganese Functionalized Silicate Nanoparticles as a FentonType Catalyst for Water Purification by Advanced Oxidation Processes (AOP)
نویسندگان
چکیده
Wet hydrogen peroxide catalytic oxidation (WHPCO) is one of the most important industrially applicable advanced oxidation processes (AOPs) for the decomposition of organic pollutants in water. It is demonstrated that manganese functionalized silicate nanoparticles with interparticle porosity act as a superior Fenton-type nanocatalyst in WHPCO as they can decompose 80% of a test organic compound in 30 minutes at neutral pH and room temperature. By using X-ray absorption spectroscopic techniques it is also shown that the superior activity of the nanocatalyst can be attributed uniquely to framework manganese, which decomposes H 2 O 2 to reactive hydroxyls and, unlike manganese in Mn 3 O 4 or Mn 2 O 3 nanoparticles, does not promote the simultaneous decomposition of hydrogen peroxide. The presented material thus introduces a new family of Fenton nanocatalysts, which are environmentally friendly, cost-effective, and possess superior effi ciency for the decomposition of H 2 O 2 to reactive hydroxyls (AOP), which in turn readily decompose organic pollutants dissolved in water.
منابع مشابه
UV/ H2O2 Advanced Oxidation Process for Simultaneous Removal of NO and SO2: A Review
This study presents a review on advanced oxidation processes (AOP) for simultaneous removal of NO and SO2. AOP is based on using a strong oxidant such as ozone and H2O2 which is able to generate highly reactive intermediates. The pollutant will be oxidized and removed by these intermediates. In recent years, AOP has been considered as an effective and attractive technology in the field of flue ...
متن کاملSynthesis and purification of Carbon nanotubes
In this study, multi wall carbon nanotubes (MWCNTs) were synthesized by Chemical vapor deposition (CVD) method using two different catalysts (Fe nanoparticles) and (Ni nanoparticles) with two different substrates: Quartz and Alumina. Acetylene gas was used as a carbon source and Argon as a carrier gas at different temperatures and different times to study the effects of these parameters on CNT...
متن کاملSynthesis and purification of Carbon nanotubes
In this study, multi wall carbon nanotubes (MWCNTs) were synthesized by Chemical vapor deposition (CVD) method using two different catalysts (Fe nanoparticles) and (Ni nanoparticles) with two different substrates: Quartz and Alumina. Acetylene gas was used as a carbon source and Argon as a carrier gas at different temperatures and different times to study the effects of these parameters on CNT...
متن کاملAmelioration of the acid blue oxidation process by as-synthesized ZnO nanoparticles: Optimization of the dye and photocatalyst concentration together with the pH of the solution
In this research, ZnO nanoparticles (NPs) were synthesized using a binary Zn(II) Schiff-base complex. The complex heat-treated to prepare ZnO nanoparticles via thermal decomposition route at a temperature of 500 °C. The formation of single-phase ZnO nanoparticles and their microstructures were studied by XRD pattern, SEM and TEM observation. The photo-degradation characteristic of the as-prepar...
متن کاملCatalytic Decomposition of H2O2 on MnFe2O4 Nanocomposites Synthesized by Various Methods in the Presence of Silicate and Zeolite Supports
In this research iron manganese oxide nanocomposites were prepared by co-precipitation, sol-gel and mechanochemical methods by using iron (III) nitrate, iron (II) sulfate and manganese (II) nitrate as starting materials. These nanocomposites were prepared in the presence of various catalyst beds. The polyvinyl pyrrolidon (PVP) was used as a capping agent to control the agglomeration of the nano...
متن کامل