Study of Steel Tests of Static Corrosion Experiments in Liquid Metal Pb-bi

نویسندگان

  • C. H. Cho
  • J. E. Cha
  • W. S. Park
  • T. Y. Song
چکیده

We try to evaluate the possibility of maintaining the corrosion-resistance of a structural material under the operational temperature and flow velocity of the optimized HYPER (HYbrid Power Extraction Reactor)[1] cooling system. It was attempted to consider the control of the oxygen concentration in the range of 350~650°C. Currently, we are performing static corrosion tests with the oxygen contents of a reduced and 10~ 10 wt% atmospheres at the temperature of 600°C. The concentration was controlled by adjusting the H2 and H2O vapor ratio. In this paper, we will show the result of the experiment performed under the reduced atmosphere with an exposure time up to 1500 hours. The corrosion of 316L is irregularly severe under the reduced atmosphere due to the solubility of the nickel at Pb and Pb-Bi. Also small amount of iron and chromium was dissolved near the surface. On the other hand, the T91 and HT9 maintained the corrosion-resistance under the same condition.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Evaluation of Corrosion Behavior of AISI 347 Stainless Steel to ASTM A335 Low Alloy Steel Dissimilar Welds

In the present study, the corrosion behavior of AISI 347 austenitic stainless steel to ASTM A335 low alloy steel dissimilar joint was investigated. For this purpose, two filler metals, ER309L and ERNiCr-3, were selected to be used during the gas tungsten arc welding process. To investigate the corrosion behavior of the joints after welding, the specimens were tested in 3.5% sodium chloride solu...

متن کامل

Investigation on Effect of Heat Input on the Corrosion Behavior of Hadfield Steel Weld Joints in SMAW Process

In this investigation, the effect of heat input of SMAW process on the corrosion behavior of Hadfield steel weld joints was investigated. For this purpose, 4 annealed sheets with thickness 25 mm prepared from Hadfield steel and then welding applied by SMAW process with 6.75 and 11.25 kJ/mm heat input values. For corrosion behavior evaluation of base metal and weld metal areas, potentiodynamic p...

متن کامل

Evaluation of the corrosion behavior of the base metal and weld metal sections of the super duplex stainless steel UNS S32750

In this study, the corrosion behavior of super duplex stainless steel UNS S32750 and tungsten arc welding with filler metals AWS ER2594 duplex stainless steel in acidic solution containing chloride ions have been investigated. Microstructure of weld joints evaluateby light and electron microscope and corrosion behavior examine by open circuit potential and cyclic polarization tests.The results ...

متن کامل

Evaluation of the corrosion behavior of the base metal and weld metal sections of the super duplex stainless steel UNS S32750

In this study, the corrosion behavior of super duplex stainless steel UNS S32750 and tungsten arc welding with filler metals AWS ER2594 duplex stainless steel in acidic solution containing chloride ions have been investigated. Microstructure of weld joints evaluateby light and electron microscope and corrosion behavior examine by open circuit potential and cyclic polarization tests.The results ...

متن کامل

Investigation on Effect of Heat Input on the Corrosion Behavior of Hadfield Steel Weld Joints in SMAW Process

In this investigation, the effect of heat input of SMAW process on the corrosion behavior of Hadfield steel weld joints was investigated. For this purpose, 4 annealed sheets with thickness 25 mm prepared from Hadfield steel and then welding applied by SMAW process with 6.75 and 11.25 kJ/mm heat input values. For corrosion behavior evaluation of base metal and weld metal areas, potentiodynamic p...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005