Optimal Design Based on Rough Set and Implementation of Worm Gear in Valve Actuator
نویسندگان
چکیده
Rough set optimization method was applied to design the worm gear in valve actuator. The superfluous constraints are reduced based on the methodology of rough set at the model of optimization that was established. The importance of each constraint condition and the coordination of the objective function can be got. Through example it can be seen that the optimal scheme made worm gear accord with the practical situation. So the volume of valve actuator was reduced and the efficiency was increased. Copyright © 2013 IFSA.
منابع مشابه
Design, Modeling, Implementation and Experimental Analysis of 6R Robot (TECHNICAL NOTE)
Design, modeling, manufacturing and experimental analysis of a six degree freedom robot, suitable for industrial applications, has been described in this paper. The robot was designed on the assumption that, each joint has an independent DC motor actuator, with gear reduction and measuring sensor for angular joint position. Mechanical design of the robot was done using Mechanical Desktop and ma...
متن کاملOptimal Integral Sliding Mode Controller of a UAV With Considering Actuator Fault
In this paper, using the State Dependent Riccati Equation (SDRE) method, we propose a Robust Optimal Integral Sliding Mode Controller (ROISMC) to guarantee an optimal control law for a quadrotor which has become increasingly important by virtue of its high degrees of manoeuvres ability in presence of unknown time-varying external disturbances and actuator fault. The robustness of the controller...
متن کاملOptimal Design of Thermal Actuated Valves Based on Level Set Based Topology Optimization
1. Abstract Recently there is a growing need for micro water cooling systems with the development of small-sized fuel cells for mobile electric devices. In general, a water cooling system requires a valve for controlling flow rate of coolant in order to keep targeted devices at appropriate working temperature. Traditional type of a flow control valve is driven by an external power source and a ...
متن کاملOscillation Control of Aircraft Shock Absorber Subsystem Using Intelligent Active Performance and Optimized Classical Techniques Under Sine Wave Runway Excitation (TECHNICAL NOTE)
This paper describes third aircraft model with 2 degrees of freedom. The aim of this study is to develop a mathematical model for investigation of adoptable landing gear vibration behavior and to design Proportional Integration Derivative (PID) classical techniques for control of active hydraulic nonlinear actuator. The parameters of controller and suspension system are adjusted according to be...
متن کاملOptimal Robust Control for a Series Elastic Actuator assisting Knee Joint
Rehabilitation and assistive systems such as rotary series elastic actuators (RSEA) should provide the desired torque precisely. In this paper, to improve the life quality of those who suffer from weak knees, the control problem of a rotary series elastic actuator (RSEA) has been studied in order to generate soft human walking motion. These actuators produce the require torque, but the nonlinea...
متن کامل