ArticleTransport and deposition of carbon nanoparticles in saturated porous mediaZhongliang Hu 1
نویسندگان
چکیده
Carbon nanoparticles (CNPs) are becoming promising candidates for oil/gas applications due to their biocompatibility and size-dependent optical and electronic properties. Their applications, however, are always associated with the flow of nanoparticles inside a reservoir, i.e., a porous medium, where insufficient studies have been conducted. In this work, we synthesized CNPs with two different size categories in 200 nm carbon balls (CNP-200) and 5 nm carbon dots (CNP-5), via a hydrothermal carbonation process. Comprehensive experiments in packed glass bead columns, as well as mathematical simulations, were conducted to understand the transport and deposition of CNPs under various ionic strength, particle sizes and concentration conditions. Our results show that the retention of CNP-200 is highly sensitive to the salinity and particle concentrations, while both of them are unaffected in the transport of small CNP-5. Supplemented with Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, the clean bed filtration theory with blocking effect can successfully fit the experimental breakthrough curves of CNP-200. However, the high breakthrough ability for CNP-5 regardless of ionic strength change is in conflict with the energy interactions predicted by traditional DLVO theory.
منابع مشابه
Transport and Deposition of Carbon Nanoparticles in Saturated Porous Media
Carbon nanoparticles (CNPs) are becoming promising candidates for oil/gas applications due to their biocompatibility and size-dependent optical and electronic properties. Their applications, however, are always associated with the flow of nanoparticles inside a reservoir, i.e., a porous medium, where insufficient studies have been conducted. In this work, we synthesized CNPs with two different ...
متن کاملInvestigation on magnetic and microwave behavior of magnetite nanoparticles coated carbon fibers composite
Radar absorbing materials, i.e. magnetite (Fe3O4) coated carbon fibers (MCCFs) were fabricated by electro-deposition technique. Black-colored single spinel phase Fe3O4 nanoparticles was easily synthesized by hydrothermal method using reduction of a Fe (III) - Triethanolamine complex in an aqueous alkaline solution at 60-80 ◦C. Uniform and compact Fe3O4 films were fabricated on nitric acid treat...
متن کاملMulti-step Electrophoretic Deposition of α-Al2O3 Nanoparticles on Carbon Substrate (TECHNICAL NOTE)
in the present study, electrophoretic deposition (EPD) was used to obtain dense and crack-free layers of Al2O3 on carbon substrate. Microstructural study of the obtained layers by scanning electron (SEM) and optical microscopy (OM) approved that crack-free layers can be obtained by EPD technique. According to obtained results, isopropanol is a suitable media to obtian compact layers which is at...
متن کاملPd nanoparticles on ZnO-passivated porous carbon by atomic layer deposition: an effective electrochemical catalyst for Li-O2 battery.
Uniformly dispersed Pd nanoparticles on ZnO-passivated porous carbon were synthesized via an atomic layer deposition (ALD) technique, which was tested as a cathode material in a rechargeable Li-O2 battery, showing a highly active catalytic effect toward the electrochemical reactions-in particular, the oxygen evolution reaction. Transmission electron microscopy (TEM) showed discrete crystalline ...
متن کاملOne-step chemical vapor deposition synthesis and supercapacitor performance of nitrogen-doped porous carbon–carbon nanotube hybrids
Novel nitrogen-doped carbon hybrid materials consisting of multiwalled nanotubes and porous graphitic layers have been produced by chemical vapor deposition over magnesium-oxide-supported metal catalysts. CN x nanotubes were grown on Co/Mo, Ni/Mo, or Fe/Mo alloy nanoparticles, and MgO grains served as a template for the porous carbon. The simultaneous formation of morphologically different carb...
متن کامل