Interrelationship Between the Efficiency Characteristics and the Centrifugal Forces at Design and Off Design Flow Rates Among Axial Flow Fans, and Compressors
نویسندگان
چکیده
Takaharu Tanaka Department of Mechanical Engineering Kobe University Nada, Kobe
منابع مشابه
Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions
In this study, the effects of the volute tongue geometry variation on the head, efficiency, velocity distribution and cavitation structure of a centrifugal pump in the steady flow behavior under off-design conditions have been investigated. Numerical simulation modeling based on the turbulence model with a hybrid grid is used to simulate the flow within the modeled pump. The flow is simulated ...
متن کاملPresenting Three Design Methods for Axial Compressor Blade via Optimization
Improving the efficiency of compressors has been one of the most important goals of researchers over the years. In this paper, three different methods are presented for parameterization and blade optimization of axial flow compressor. All methods consist of flow analysis tool, optimization algorithms, and parametric geometry generation tool, that are different in each approach. Objective functi...
متن کاملHydraulic Resistance and Flow Pattern at Design and Off Design Flow Rates Among Axial Flow Machines
In an axial flow machine, fluids flow condition, that is flow pattern in a rotating flow passage changes its form and magnitude by the hydraulic resistance to the fluid flow in flow passage. Effect of centrifugal force becomes stronger with the increase of hydraulic resistance, and the flow rate becomes smaller. And, in the comparison of fluids flow condition among different axial flow machines...
متن کاملEffect of blade profile on the performance characteristics of axial compressor in design condition
The choice of geometrical shape of the blades has a considerable effect on aerodynamic performance and flow characteristics in axial compressors. In this paper, the effects of the blades shape on the aerodynamic design characteristics are investigated based on Streamline Curvature Method (SCM). Initially, the Streamline Curvature Method (SCM) is used for designing a two-stage axial compressor. ...
متن کاملEffects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کامل