Proposal and testing for a fiber-optic-based measurement of flow vorticity.
نویسندگان
چکیده
A fiber-optic arrangement is devised to measure the velocity difference, deltav(l), down to small separation l. With two sets of optical fibers and couplers the new technique becomes capable of measuring one component of the time- and space-resolved vorticity vector omega(r, t). The technique is tested in a steady laminar flow, in which the velocity gradient (or flow vorticity) is known. The experiment verifies the working principle of the technique and demonstrates its applications. It is found that the new technique measures the velocity difference (and hence the velocity gradient when l is known) with the same high accuracy and high sampling rate as laser Doppler velocimetry does for the local velocity measurement. It is nonintrusive and capable of measuring the velocity gradient with a spatial resolution as low as ~50 mum. The successful test of the fiber-optic technique in the laminar flow with one optical channel is an important first step for the development of a two-channel fiber-optic vorticity probe, which has wide use in the general area of fluid dynamics, especially in the study of turbulent flows.
منابع مشابه
A fiber optic sensor for measuring glucose in aqueous solutions
In this paper, the set-up of a multi-mode fiber optic sensor for measuring glucose in aqueous solutions is investigated and evaluated. The basis of this sensor is based on the Fresnel Reflection. In this setup, a helium-neon laser is used as a light source, a fiber optic probe, photocell as detector and a digital multimeter. The statistical analysis of the recorded data shows a highly linear be...
متن کاملFiber - Optic Sensing of Linear Thermal Expansion (RESEARCH NOTES)
The use of a LED fiber-optic sensor to measure displacement and linear thermal expansion is described. It has a sensitivity of about 0.6 mV/mm, a resolution of 1.25 mm, and a dynamic rang of 400 mm for displacement measurements. For thermal expansion, it shows a sensitivity of about 3.5 mV/C, and the experimental linear expansion values are in agreement with those calculated. The reported senso...
متن کاملInvestigation of the Effect of Electron Beam Different Doses on Optical Dissipation in Fiber Optic
Measurement of ionizing radiation in various fields, such as environmental safety, industrial detection processes, radiation protection and medical is very important. Radiation dosimetry plays an important role in determining the amount of energy absorbed and the effects of radiation. Recent optical fiber sensors have been shown to be radiation dosimeters. Our goal here is to investigate the ef...
متن کاملSensitivity Enhancement of Fiber Optic Diesel Adulteration Detection Sensor Using Stripped Clad SBend Section
A novel geometry for enhancing the sensitivity of intensity modulated refractometric fiber optic sensor for detection of adulteration level in diesel by kerosene is proposed. In this multimode plastic optical fiber is uncladded for specific length and bent into S shape. This geometry is simulated and analyzed using Beam Propagation Method in Beam prop RSOFT software. When sensor is immersed in ...
متن کاملMonitoring of Railway Deformations using Distributed Fiber Optic Sensors
Natural phenomena like earthquakes, landslides, avalanches or mud flows can cause severe damages of railway tracks. Today’s monitoring concepts either focus on a permanent monitoring of known problematic sites or an epochwise measurement of the railway track with special measurement cars. In this paper we present a new approach for continuous monitoring of railway tracks over long distances. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 40 24 شماره
صفحات -
تاریخ انتشار 2001