Fault Tolerance in Cooperative Manipulators
نویسندگان
چکیده
The problem of fault tolerance in cooperative manipulators rigidly connected to a solid object is addressed in this paper. Four faults are considered: free-swinging joint faults, locked joint faults, incorrect measured joint position, and incorrect measured joint velocity. The faults are first detected by a fault detection and isolation system. Freeswinging and locked joint faults are isolated using artificial neural networks. The other faults are isolated based on the kinematic constraints imposed on the cooperative system. After the isolation of the faults, the control system is reconfigured. Control laws for the system with passive or locked joints are developed. Results of the fault tolerance system applied in simulations and in a real cooperative system are presented.
منابع مشابه
A fault tolerance framework for cooperative robotic manipulators
The problem of fault tolerance in cooperative manipulators rigidly connected to an undeformable load is addressed in this paper. Four categories of faults are considered: free-swinging joint faults (FSJFs), locked joint faults (LJFs), incorrectly measured joint position faults (JPFs), and incorrectly measured joint velocity faults (JVFs). Free-swinging and locked joint faults are detected via a...
متن کاملDesign of modular fault tolerant manipulators
In this paper, we deal with two important issues in relation to modular recon gurable manipulators, namely, the determination of the modular assembly con guration optimally suited to perform a speci c task and the synthesis of fault tolerant systems. We present a numerical approach yielding an assembly con guration that satis es four kinematic task requirements: reachability, joint limits, obst...
متن کاملQuantifying and Optimizing Failure Tolerance of a Class of Parallel Manipulators
For any robotic system, fault tolerance is a desirable property. This work uses a comparative approach to investigate fault tolerance and the associated problem of reduced manipulability of robots. An important result in combinatorial matrix theory is first obtained. Its consequent modifications are then applied to the theory of fault tolerance of robotic manipulators. It is shown that for a ce...
متن کاملMapping Tasks into Fault Tolerant Manipulators
The application of robots in critical missions in hazardous environments requires the development of reliable or fault tolerant manipulators. In this paper, we define fault tolerance as the ability to continue the performance of a task after immobilization of a joint due to failure. Initially, no joint limits are considered, in which case we prove the existence of fault tolerant manipulators an...
متن کاملThe Use of Fault Trees for the Design of Robots for Hazardous Environments - Reliability and Maintainability Symposium, 1996 Proceedings. 'International Symposium on Product Q
This paper addresses the application of fault trees to the analysis of robot manipulator reliability and fault tolerance. Although a common and useful tool in other applications, fault trees have only recently been applied to robots. In addition, most of the fault tree analyses in robotics have focused on qualitative, rather than quantitative, analysis. Robotic manipulators present some special...
متن کامل