Preliminary Hazard Analysis Generation Integrated with Operational Architecture - Application to Automobile
نویسندگان
چکیده
We are witnessing evolution of standards (as the functional safety one) and increasing of complexity. This implies to perform safety studies efficiently and earlier in the context of Model-Based System Engineering. So, in this article, we will propose an evolution of the Preliminary Hazard Analysis (PHA) method in order to comply with the overall safety requirements in the automotive domain. To demonstrate its usefulness, we apply this method to an industrial case which concerns the hazard analysis of unintended acceleration of a vehicle.
منابع مشابه
Risk Analysis and Economic Load Dispatch Evaluation of Network with High Wind Power Penetration
This study based on investigation for integration wind power into conventional power system with its impact on fossil fuel generators and their generation management. Wind power as environmental friendly energy source can reduce the operational cost of the system due to considering no cost for energizing the generator in comparing with fossil fuel generators. However due to unpredictable nature...
متن کاملSafety Security and Risk Management - Aftermath Bhopal Disaster
Submit Manuscript | http://medcraveonline.com Abbreviations: MIC: Methyl Isocyanate; UCIL: Union Carbide India Ltd; RDX: Research Development Explosive; HAZOP: Hazard Operability Studies; PHA: Preliminary Hazard Analysis; IHA: Interface Hazard Analysis; O&SHA: Operating and Support Hazard Analysis; QRA: Quantitative Risk Analysis; RA: Risk Analysis; MORT: Management Oversight Risk Tree Analysis...
متن کاملApplication of Multivariate Control Charts for Condition Based Maintenance
Condition monitoring is the foundation of a condition based maintenance (CBM). To relate the information obtained from the condition monitoring to the actual state of the system, it is usually required a stochastic model. On the other hand, considering the interactions and similarities that exist between CBM and statistical process control (SPC), the integrated models for CBM and SPC have been ...
متن کاملFrom Hazard Analysis to Hazard Mitigation Planning: The Automated Driving Case
Vehicle safety depends on (a) the range of identified hazards and (b) the operational situations for which mitigations of these hazards are acceptably decreasing risk. Moreover, with an increasing degree of autonomy, risk ownership is likely to increase for vendors towards regulatory certification. Hence, highly automated vehicles have to be equipped with verified controllers capable of reliabl...
متن کاملExplosion Prevention in Coal Mine TBM Drifts-An Operational Knowledge Share
Since the first record of a colliery explosion in Belgium, nearly 300 years ago, significant improvements have been achieved in the prevention of explosions in mines. However, based on the past surface TBM project safety statistics, gas explosion hazards are not unique to coal mines but also occur in TBM projects with 48 explosion fatalities recorded worldwide calling for continued diligence an...
متن کامل