A Pulse-width Modulation Based DC-DC Converter for Electric Propulsion.pmd
نویسندگان
چکیده
A DC-DC converter is designed according to the request of the electric propulsion system for a fuel cell sightseeing car. The converter adopts a simple topography full bridge circuit. The main switch transistors are driven by the module TL494, based on pulse-width modulation method. A high accuracy linear optical coupler is used to isolate analogy signal in order to guarantee the stabilization of the converter. Experiments show that the converter can satisfy the requirements of the power match between the fuel cell and the motor under the ordinary operation conditions.
منابع مشابه
A High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملA High Frequency-Link Bidirectional DC-DC Converter for Super Capacitor-Based Automotive Auxiliary Electric Power Systems
This paper presents a bidirectional DC-DC converter suitable for low-voltage super capacitor-based electric energy storage systems. The DC-DC converter presented here consists of a full-bridge circuit and a current-fed push-pull circuit with a high frequency (HF) transformer-link. In order to reduce the device-conduction losses due to the large current of the super capacitor as well as unnecess...
متن کاملA Modified Phase-Shifted Pulse Width Modulation to Extend Linear Operation of Hybrid Modular Multi-level Converter
Recently, hybrid modular multi-level converters, which are configured as full and half bridge sub-modules, are developed and utilized in the wide area of applications. Compared to its non-hybrid counterpart, these converters have several advantages such as the ability to nullify the DC side fault current and controlling AC side reactive power during the faults. This paper proposes a modified ph...
متن کاملRobust Control Applied to Improve the Performance of a Buck-Boost Converter
In this paper, H∞ loop-shaping control is applied to improve the performance of a buckboost dc-dc power converter based on pulse-width-modulation (PWM) techniques. Here, classical control techniques (i.e., proportional-integral-derivative (PID) control) and post-modern control techniques (i.e., H∞ control), are used to design the feedback loop of a buck-boost dc-dc power converter. The results ...
متن کاملThe Influence of DC-Link Voltage on Commutation Torque Ripple of Brushless DC Motors with Two-Segment Pulse-width Modulation Control Method
The commutation process causes current ripple to be generated in the drive system of brushless DC (BLDC) motor. This, in turn, leads to output torque ripple. Mechanical vibration and acoustic noise are its influences which are undesirable phenomenon in some applications. A new method is presented in this paper which reduces torque ripple and commutation period in the entire range of motor speed...
متن کامل