A nonlinear damping control for the vibration mitigation of the benchmark highway bridge
نویسندگان
چکیده
CoDAlab, Departament de Matemàtica Aplicada III, Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona (EUETIB), Universitat Politècnica de Catalunya (UPC), Comte d’Urgell, 187, 08036 Barcelona, Spain CoDAlab, Departament de Matemàtica Aplicada III, Escola Tècnica Superior d’Enginyers de Camins, Canals i Ports de Barcelona (ETSECCPB), Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
منابع مشابه
Comparative Research on Optimal Damping Matching of Seat System for an off-Highway Dump Truck
To protect the driver of off-highway dump trucks from the harmful vibration, this paper presents the comparison results to determine the optimal damping of the seat system by different optimization design plans. Three optimization schemes are considered including individually optimizing the damping of the cushion, individually optimizing the damping of the seat suspension, and integrately optim...
متن کاملSeismic Mitigation of Building Frames using Magnetorheological Damper (TECHNICAL NOTE)
The present study focusses on the damping force control of shear mode magnetorheological (MR) damper for seismic mitigations. Therefore, the semi-active MR damper which can control the vibration is analyzed both experimentally and numerically. Carbonyl iron is used as the magnetic particle and Castrol Magnetec oil as carrier fluid throughout the study. MR damper is designed and fabricated, and ...
متن کاملOptimal Nonlinear Energy Sinks in Vibration Mitigation of the Beams Traversed by Successive Moving Loads
Optimal Nonlinear Energy Sink (NES) is employed in vibration suppression of the beams subjected to successive moving loads in this paper. As a real application, a typical railway bridge is dynamically modeled by a single-span beam and a traveling high-speed train is simulated by a series of successive moving loads. Genetic algorithm is employed as the optimization technique and optimal paramete...
متن کاملApplication of linear and nonlinear vibration absorbers for the nonlinear beam under moving load
Recently, a large amount of studies have been related to nonlinear systems with multi-degrees of freedom as well as continuous systems. The purpose of this paper is to optimize passive vibration absorbers in linear and nonlinear states for an Euler-Bernoulli beam with a nonlinear vibratory behavior under concentrated moving load. The goal parameter in the optimization is maximum deflection of t...
متن کاملPassive Vibration Control for Fatigue Damage Mitigation in Steel Jacket Platforms
Considering the stress cycles in the joints and members due to wave induced forces on offshore platforms, fatigue analysis is therefore one of the most important analyses in the offshore platforms design. Although most of the steel jacket type platforms are designed and located in areas with relatively high ratios of operational sea-states, for maximum environmental events, would have acceptabl...
متن کامل