Self-forming TiBN Nanocomposite Multilayer Coating Prepared by Pulse Cathode Arc Method
نویسندگان
چکیده
Novel multilayer structured TiBN coatings were deposited on Si (100) substrate using TiBN complex cathode plasma immersion ion implantation and deposition technique (PIIID). The coatings were characterized by X-ray diffraction (XRD), high-resolution transmission electron microcopy (HRTEM), energy-dispersive spectrometer (EDS) and ball-on-disk test. XRD results reveal that both samples of TiBN coatings have the main diffraction peak of TiN (200) and (220). Cross-section TEM images reveal that these coatings have the character of self-forming multilayer and consists of face-centered cubic TiN and hexagonal BN nanocrystalline embedded in amorphous matrix. Because of the existence of hexagonal BN, the friction coefficient of the new TiBN coating in room temperature is obviously lower than that of the monolithic TiN nanocrystalline coating.
منابع مشابه
Die Materials Modulated Pulsed Power Magnetron Sputtering for Die Surface Engineering
The utility of hard tribological coatings based on transition nitrides (e.g. CrN, TiAlN, CrAlN, etc.) as protective layers on various forming tools (e.g. die and its components used in high pressure die casting) has led to improvements in increased die life, reduced machine down time, and improved product quality. Moreover, recent advances in the coating design made it possible to obtain nanosc...
متن کاملWear resistant multilayer nanocomposite WC1-x/C coating on Ti- 6Al-4V titanium alloy
A significant improvement of tribological properties on Ti-6Al-4V has been achieved by developed in this study multilayer treatment method for the titanium alloys. This treatment consists of an intermediate 2 μm thick TiCxNy layer which has been deposited by the reactive arc evaporation onto a diffusion hardened material with interstitial O or N atoms by glow discharge plasma in the atmosphere ...
متن کاملA New Polymeric Nanocomposite Coating for Corrosion Protection of Carbon Steel in HCl Solution
In the present work, four polymeric nanocomposite PNC coatings were prepared with different concentrations of yttrium aluminum garnet nanoparticles YAG-NPs in polyvinyl butyral PVB matrix. The corrosion protection of the PNC coatings applied on the carbon steel surface was investigated in 1.0 M HCl solution by electrochemical impedance spectroscopy EIS. The YAG-NPs were synthesized by pulse ele...
متن کاملSynthesis and characterization of Cr–B–N coatings deposited by reactive arc evaporation
Nanocomposite Cr–B–N coatings were deposited from CrB0.2 compound targets by reactive arc evaporation using an Ar/N2 discharge at 500 °C and −20 V substrate bias. Elastic recoil detection (ERDA), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), and selected-area electron diffraction (SAED) were used to study the effect of...
متن کاملCorrosion Behavior of Ti/TiN Multilayer Nanostructured Coatings Applied on AISI 316L by Arc-PVD Method in the Simulated Body Fluid
In this investigation, Ti/TiN nanolayer and TiN single layer coatings were coated on substrate of AISI 316L stainless steel by applying physical vapor deposition (PVD) using the type of cathodic arc evaporation (CAE). The evaluation of microstructure were carried out using x-ray diffraction (XRD), nanoindentation, atomic force microscopy (AFM) as well as scanning electron microscopy (SEM). Pola...
متن کامل