Online Reconstruction of 3D Objects from Arbitrary Cross-Section Data
نویسنده
چکیده
.......................................................................................................................................................... 1 NOTATIONS ......................................................................................................................................................... 2
منابع مشابه
کاربرد چاپگر سهبعدی در بازسازی اشیای تاریخی شیشهای
Three-dimensional tools are widely used for various purposes, particularly Three- dimensional printers which play a great role in simplification and acceleration of phases in production process for various fields ranging from medicine to industry. Due to the problems related to the reconstruction of missing parts in restoration of historic glass objects in the methods of molding, casting and f...
متن کاملDesign and Manipulation 3D Imaging System by using Photodiode Grid
Introduction: Radiation imaging is one of the applicable methods in diagnostic medicine and nondestructive testing for industrial applications. In nondestructive 3D imaging, in addition to the radiation source, there is a requirement for a suitable detection system, data acquisition system, mechanical sections for moving objects, reconstruction algorithm and finally a computer for processing an...
متن کامل3D Modeling Based on Radon Transform with Application in Volume Measurement
In this paper, we have adopted a novel method for 3D-shape reconstruction. We derived a volumetric data which is constructed from a stack of cross-section imagesthe so-called tomographic image. Each of the cross-section images is computed from a series of photographs taken at a number of angles around the object. A corresponding intensity profile (row) on each digitized photograph resembles a p...
متن کاملA Time-Domain Method for Shape Reconstruction of a Target with Known Electrical Properties (RESEARCH NOTE)
This paper uses a method for shape reconstruction of a 2-D homogeneous object with arbitrary geometry and known electrical properties. In this method, the object is illuminated by a Gaussian pulse, modulated with sinusoidal carrier plane wave and the time domains’ footprint signal due to object presence is used for the shape reconstruction. A nonlinear feedback loop is used to minimize the diff...
متن کاملiii DEDICATION To my three
Protopsaltis, Antonios, A.P. PhD, Computer Science Department, University of Ioannina, Greece. January, 2010. Reconstructing 3D CAD Models based on geometrically constrained cross sections Thesis Supervisor: Fudos, Ioannis. We introduce a novel approach to reconstructing 3D objects from cross sections of point clouds acquired by laser scanning. Cross sections are almost planar clusters of 3D po...
متن کامل