Ceramic/metal joining for structures and materials
نویسنده
چکیده
The paper presents a discussion of the various types of ceramic joining within a conceptual framework based on the fundamentals of wetting, adhesion, and the thermodynamics of interfacial reactions. Examples are given of solid state diffusion bonding of Pt to alumina and brazing of AlN. Most ceramic-metal bonding is conducted at high temperatures, where chemical reaction is to be expected. The way in which bond strength is affected by chemical reaction at ceramic-metal interfaces is also discussed.
منابع مشابه
Large Area Active Brazing of Multi-tile Ceramic-Metal Structures
Lightweight ceramic-metal combinations are one option for advanced vehicle and other structural applications. These structures can require the fabrication of large area arrays of ceramic tiles on a metallic backing. However, the process of fabricating a combination of lightweight ceramics and metals is complicated by the need to bond these very dissimilar materials together. For severe applicat...
متن کاملThe evaluation and comparison of marginal adaptation in metal ceramic and all ceramic restorations fabricated by two methods: CAD/CAM and conventional
Introduction: Marginal fit is a key factor for long term clinical success through any dental restorations. Poor marginal adaptation causes cement dissolution. This can lead to dental caries, gingival irritation, periodontal diseases, and finally treatment failure. The aim of this study was measurement and comparison of marginal gap quantities in metal ceramic and all ceramic dental restorations...
متن کاملEffect of anodizing on pulsed Nd:YAG laser joining of polyethylene terephthalate (PET) and aluminium alloy (A5052)
A series of laser joining experiments between polyethylene terephthalate (PET) and aluminium alloy (A5052) were conducted to investigate the effect of anodizing on A5052 surface on dissimilar materials used in joining. In this study, PET/A5052 joints with anodized A5052 surface exhibited greater shear strength compared to PET/A5052 joints without anodizing. The shear strength of the joints was ...
متن کاملContemporary all-ceramic materials, part-1.
Over the past 35 years, multiple types of all-ceramic materials have been introduced as an ideal alternative for metal-fused to ceramic. This review covers state-of-the-art development of all-ceramic systems in terms of history, material composition, fabrication technologies, and structural and strength properties. These materials are proved to be ideal in terms of mechanical properties and bio...
متن کامل