A chemo-mechanical model of lithiation in silicon
نویسندگان
چکیده
We present a chemo-mechanical model to investigate the lithiation-induced phase transformation, morphological evolution, stress generation and fracture in crystalline silicon nanowires (c-SiNWs). The model couples lithium (Li) diffusion with elasto-plastic deformation in a three-dimensional (3D) setting. Several key features observed from recent transmission electron microscopy (TEM) studies are incorporated into the model, including the sharp interface between the lithiated amorphous shell and unlithiated crystalline core, crystallographic orientation dependent Li–Si reaction rate, and largestrain plasticity. Our simulation results demonstrate that the model faithfully predicts the anisotropic swelling of lithiated SiNWs observed from previous experimental studies. Stress analysis from the finite-deformation model reveals that the SiNWs are prone to surface fracture at the angular sites where two adjacent {110} facets intersect, consistent with previous experimental observations. The mechanistic understanding of the morphological evolution and stress generation sheds light on the design of failure-resistant nanostructured electrodes. Our model offers a framework for the study of the chemomechanical degradation in high-capacity electrode materials. & 2014 Elsevier Ltd. All rights reserved.
منابع مشابه
Stress effects on the initial lithiation of crystalline silicon nanowires: reactive molecular dynamics simulations using ReaxFF.
Silicon (Si) has been recognized as a promising anode material for the next-generation high-capacity lithium (Li)-ion batteries because of its high theoretical energy density. Recent in situ transmission electron microscopy (TEM) revealed that the electrochemical lithiation of crystalline Si nanowires (c-SiNWs) proceeds by the migration of the interface between the lithiated Si (LixSi) shell an...
متن کاملNumerical and experimental investigation of (de)lithiation-induced strains in bicontinuous silicon-coated nickel inverse opal anodes
A volume expansion of up to ~310% occurs upon the lithiation of silicon in Si-coated nickel inverse opal anodes, which causes (de)lithiation-induced mismatch stresses and strains between the Si and Ni during battery cyclical (dis)charging. These (de)lithiation-induced mismatch strains and stresses are modeled via sequentially coupled diffusionand stress-based finite element (FE) analysis, which...
متن کاملHigh damage tolerance of electrochemically lithiated silicon
Mechanical degradation and resultant capacity fade in high-capacity electrode materials critically hinder their use in high-performance rechargeable batteries. Despite tremendous efforts devoted to the study of the electro-chemo-mechanical behaviours of high-capacity electrode materials, their fracture properties and mechanisms remain largely unknown. Here we report a nanomechanical study on th...
متن کاملSandwich-lithiation and longitudinal crack in amorphous silicon coated on carbon nanofibers.
Silicon-carbon nanofibers coaxial sponge, with strong mechanical integrity and improved electronic conductivity, is a promising anode structure to apply into commercial high-capacity lithium ion batteries. We characterized the electrochemical and mechanical behaviors of amorphous silicon-coated carbon nanofibers (a-Si/CNFs) with in situ transmission electron microscopy (TEM). It was found that ...
متن کاملKinetics and fracture resistance of lithiated silicon nanostructure pairs controlled by their mechanical interaction
Following an explosion of studies of silicon as a negative electrode for Li-ion batteries, the anomalous volumetric changes and fracture of lithiated single Si particles have attracted significant attention in various fields, including mechanics. However, in real batteries, lithiation occurs simultaneously in clusters of Si in a confined medium. Hence, understanding how the individual Si struct...
متن کامل