Blade and Shaft Crack Detection Using Torsional Vibration Measurements Part 3: Field Application Demonstrations
نویسندگان
چکیده
The primary goal of the this paper is to summarize field demonstrations of the feasibility of detecting changes in blade and shaft natural frequencies (such as those associated with a blade or shaft crack) on operating machinery using non-contact, nonintrusive measurement methods. Laboratory demonstration of feasibility and some special signal processing issues were addressed in Parts 1 and 2 [1, 2]. Part 3 primarily addresses the results of application of this non-intrusive torsional vibration sensing to: a large wind tunnel fan; a jet engine high-pressure disk; a hydro station turbine; and to a large coalfired power plant induced-draft (ID) fan motors. During the operation of rotating equipment, torsional natural frequencies are excited by turbulence, friction, and other random forces. Laboratory testing was conducted to affirm the potential of this method for diagnostics and prognostics of blade and shafting systems. Field installation at the NASA Ames National Full-Scale Aerodynamic Facility (NFAC) reaffirmed the ability to detect both shaft and blade modes. Installation on a high-pressure (HP) disk in a jet engine test cell at General Electric Aircraft Engines demonstrated that the fundamental mode of the turbine blades was clearly visible during operation. Field installation at a hydro power station demonstrated that the first few shaft natural frequencies were visible, and correlated well with finite element results. Finally, field installation on the ID fan motors also showed the first few shaft torsional modes. These field tests have resulted in high confidence in the feasibility of the application of this technique for diagnosing and tracking shaft and blade cracks in operating machinery.
منابع مشابه
Application of Torsional Vibration Measurement to Blade and Shaft Crack Detection in Operating Machinery
The primary goal of the this paper is to summarize field demonstrations of the feasibility of detecting changes in blade and shaft natural frequencies (such as those associated with a blade or shaft crack) on operating machinery using non-contact, nonintrusive measurement methods. This paper primarily addresses the results of application of this nonintrusive torsional vibration sensing to: a la...
متن کاملRotor Crack Detection Approach Using Controlled Shaft Deflection
Rotating shafts are important and responsible components of many machines, such as power generation plants, aircraft engines, machine tool spindles, etc. A transverse shaft crack can occur due to cyclic loading, creep, stress corrosion, and other mechanisms to which rotating machines are subjected. If not detected early, the developing shaft crack can lead to a serious machine damage resulting ...
متن کاملApplication of Torsional Vibration Measurement to Shaft Crack Monitoring in Power Plants
The primary goal of the this project was to demonstrate the feasibility of detecting changes in shaft natural frequencies (such as those associated with a shaft crack) on rotating machinery in electric power generation plants using non-contact, nonintrusive measurement methods. During the operation of power plant equipment, torsional natural frequencies are excited by turbulence, friction, and ...
متن کاملTheoretical and Experimental Study on Vibration of Cracked Shafts using Order Analysis
In this paper, the effects of transverse cracks on rotating shaft are studied. According to earlier works, crack shaft failure decrease the critical speed of the shaft and also exhibit a nonlinear vibration behaviour leading to increases the amplitude of 1X and 2X harmonics (first and second order of rotational speed in torsional vibration). This suggests that the application of order analysis ...
متن کاملTorsion response of a cracked stainless steel shaft
A B S T R A C T Pump shafts used for power generation are susceptible to fatigue cracking while often in near-continuous operation. Technology based on torsional vibration is under development for condition-based assessment of shaft health. The focus of this paper is on the relationship between a crack, which propagated due to bending loads, and the torsional stiffness of the shaft. An analytic...
متن کامل