A Variable Switching Frequency with Boost Power Factor Correction Converter
نویسندگان
چکیده
This paper presents single phase Power Factor Correction (PFC) with proposed variable switching frequency (VSF) control technique. The increasing of non linear loads such as thyristor rectifiers, switching-mode power supplies, adjustable speed drives, and generate harmonic currents causing various problems to the other equipment connected to the point of common coupling. There are several disadvantages in the existing PFC control implementation based on conventional PWM control. This system considered uses a unified overcomes such a drawback by converting a voltage source into a fastacting current source, which is reduce the harmonics in the line current, increases the efficiency and capacity of power system. The capacitor and inductor with voltage and current ripple with minimum ripple values was designed to absorb sinusoidal input current and to reduce total harmonic distortion (THD) in the input current with output voltage regulation. The principal of operation, theoretical analysis, simulation results on a single phase boost converter are presented.
منابع مشابه
An Improved Zero-Voltage-Transition Technique in a Single-Phase Active Power Factor Correction Circuit
This paper presents an improved Zero-Voltage-Transition Technique (ZVTTechnique) in a single-phase active power factor correction circuit based on a dc-dc boost converter topology and operated in a continuous-inductor-current mode with fixed-switching frequency control. An additional circuit for reducing the turn-off switching loss of the auxiliary switching circuit was applied. Experimental wo...
متن کاملSimulation and Experimental Verification of Closed Loop Operation of Buck / Boost DC-DC Converter with Soft Switching
A major problem in an isolated DC/DC converters operating at high switching frequencies is the attendant switching losses in the semiconductor devices. This can be reduced by introducing either zero-voltage switching (ZVS) or zero-current switching (ZCS) of the semiconductor switches. This paper deals with the simulation, design, fabrication and experimental evaluation of a novel soft-switching...
متن کاملA Soft Switched DC-DC Boost Converter for Use in Grid Connected Inverters
This paper presents a soft-switching DC-DC boost converter, which can be utilized in renewable energy systems such as photovoltaic array, and wind turbine connections to infinite bus of a big power network, using grid connected inverters. In the proposed topology for the DC-DC boost converter, the main and the auxiliary power switches are turned on and turned off with zero voltage switching (ZV...
متن کاملEffects of Switching Frequency Modulation on Input Power Quality of Boost Power Factor Correction Converter
Received Feb 13, 2017 Revised Apr 30, 2017 Accepted May 15, 2017 Switching frequency modulation (SFM) as spread-spectrum technique has been used for electromagnetic interference reduction in switching power converters. In this paper, a switching-frequency-modulated boost power factor correction (PFC) converter operating in continuous conduction mode is analysed in detail in terms of its input p...
متن کاملImproved Parallel Boost Power Converter for Power Factor Correction
The main objective of the study is to analysis and design parallel boost power converter for power factor correction using an active filtering approach by implementing single-phase soft-switching technique with an active snubber circuit. Zero voltage transition to turn ON and zero current transition to turn OFF is implemented by the active snubber circuit for the main switches with no any furth...
متن کامل