On Line Monitoring for Defects in Electric Arc Stud Welding
نویسنده
چکیده
ABSTRACT The application of on-line monitoring system for recording main welding parameters during electric arc stud welding process at different electric arc stability changes is described in this paper. In the first part of the paper, the basics of electric arc stud welding process, and equipment for stud welding and process monitoring used in experimental part is described. In the second part of the paper the analysis of process parameters during welding with purposely induced instabilities is analyzed.
منابع مشابه
A Weld Defects Detection System Based on a Spectrometer
Improved product quality and production methods, and decreased production costs are important objectives of industries. Welding processes are part of this goal. There are many studies about monitoring and controlling welding process. This work presents a non-intrusive on-line monitoriment system and some algorithms capable of detecting GTAW weld defects. Some experiments were made to simulate w...
متن کاملInfluence of the Activating Flux on Weld Joint Properties at Arc Stud Welding Process
The first papers on the activating flux application appeared already in 1950’s and 1960’s, but the interest for this welding process has been activated again in the last ten years 1, 2 . In order to increase the efficiency and productivity of TIG process, a variant of process with the activating flux is applied (ATIG). With the presence of the activating flux and high temperature, the value of ...
متن کاملTaguchi Experimental Design and Artificial Neural Network Solution of Stud Arc Welding Process
Stud arc welding has become one of the most important unit operations in the mechanical industries. The need to reduce the time from product discovery to market introduction is inevitable. Reducing of standard deviation of tensile strength with desirable tensile strength joint as a performance character was use to illustrate the design procedure. The effects of (welding time, welding current, s...
متن کاملUse of the Plasma Spectrum RMS Signal for Arc-Welding Diagnostics
A new spectroscopic parameter is used in this paper for on-line arc-welding quality monitoring. Plasma spectroscopy applied to welding diagnostics has typically relied on the estimation of the plasma electronic temperature, as there is a known correlation between this parameter and the quality of the seams. However, the practical use of this parameter gives rise to some uncertainties that could...
متن کاملExploring Infrared Sensoring for Real Time Welding Defects Monitoring in GTAW
This paper presents an evaluation of an infrared sensor for monitoring the welding pool temperature in a Gas Tungsten Arc Welding (GTAW) process. The purpose of the study is to develop a real time system control. It is known that the arc welding pool temperature is related to the weld penetration depth; therefore, by monitoring the temperature, the arc pool temperature and penetration depth are...
متن کامل