Dielectric Properties of Carbon Nanofibre/Alumina Composites
نویسندگان
چکیده
Carbon nanofibre (CNF)/Al2O3 composites with concentrations between 1 and 9 vol.% of CNF were prepared by the traditional ceramic 1 *Corresponding author. Tel/Fax: +34 985733644. E-mail address: [email protected] (J.L. Menendez)
منابع مشابه
The electronic transport properties and microstructure of carbon nanofibre / epoxy composites
Carbon nanofibres (CNF) were dispersed into an epoxy resin using a combination of ultrasonication and mechanical mixing. The electronic transport properties of the resulting composites were investigated by means of impedance spectroscopy. It was found that a very low critical weight fraction (pc = 0.064 wt %) which may be taken to correspond to the formation of a tunneling conductive network in...
متن کاملElectrical properties of UHMWPE/graphite nanoplates composites obtained by in-situ polymerization method
There are described nanocomposites based on ultra high molecular weight polyethylene and graphite nanoplates prepared by in-situ polymerization method. It is carried out a comprehensive study of electric properties of these composites, including direct current (dc) and alternating current (ac) properties. There is explored dependence of the conductivity and dielectric permeability on filler con...
متن کاملAlumina Matrix Composites with Non-Oxide Nanoparticle Addition and Enhanced Functionalities
The addition of SiC or TiC nanoparticles to polycrystalline alumina matrix has long been known as an efficient way of improving the mechanical properties of alumina-based ceramics, especially strength, creep, and wear resistance. Recently, new types of nano-additives, such as carbon nanotubes (CNT), carbon nanofibers (CNF), and graphene sheets have been studied in order not only to improve the ...
متن کاملElectrical and Mechanical Performance of Hybrid and Non-hybrid Composites
This paper investigated the moisture absorption, mechanical behavior and the dielectric performance of hybrid and non-hybrid polymeric composites. Hand lay-up technique was used for processing carbon; glass reinforced polyester resin composites (non-hybrid) and carbon-glass/polyester hybrid composites with various fiber configurations. The maximum resistance of water absorption was obtained for...
متن کاملOrdered mesoporous carbon/α-alumina nanosheet composites.
Novel α-alumina crystalline nanosheets are used for the preparation of alumina-carbon composites, in which the latter component is phenolic resin-based ordered mesoporous carbon. A unique feature of these composites is perpendicular orientation of ordered mesopores of the carbon to the (001) facets of nonporous α-alumina nanosheets accompanied by significant enlargement of these mesopores in co...
متن کامل