Analysis of Diesel and Rapeseed Methyl Ester Properties in Ceup Fuel Pipeline Using Frequency Dependent Damping Model

نویسندگان

  • Qaisar Hayat
  • Fan Liyun
  • Song Enzhe
  • Xiuzhen Ma
  • Tian Bingqi
  • Naeim Farouk
چکیده

During a fuel injection cycle pressure inside Combination Electronic Unit Pump (CEUP) fuel injection system varies from low (~50 bars) to very high (~1500 bars) in fractions of seconds depending on the operating conditions. Physical properties of fuel including density, acoustic wave speed and bulk modulus also vary as a function of rapidly varying fuel pressure. A detailed analysis of these key fuel properties with our improved frequency dependent model with viscous damping developed in MATLAB is presented for both diesel and biodiesel fuel Rapeseed Methyl Ester (RME). Quantitative analysis of developed model confirms that model predictions are quite realistic and accurate across range of operating conditions of diesel engine.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of Key Fuel Properties inside Combination Electronic Unit Pump Fuel Pipeline

Because of high pressure fluctuations in Combination Electronic Unit Pump (CEUP) system during fuel injection cycles, physical properties of diesel fuel including density, acoustic wave speed and bulk modulus also vary. These physical properties of fuel have significant importance in predicting the fuel injection behavior and its optimization. A 1D viscous damped mathematical model of wave equa...

متن کامل

Exergy and Energy Analysis of Diesel Engine using Karanja Methyl Ester under Varying Compression Ratio

The necessity for decrease in consumption of conventional fuel, related energy and to promote the use of renewable sources such as biofuels, demands for the effective evaluation of the performance of engines based on laws of thermodynamics. Energy, exergy, entropy generation, mean gas temperature and exhaust gas temperature analysis of CI engine using diesel and karanja methyl ester blends at d...

متن کامل

The Impact of Bioesters on Lubricity of Diesel Fuels

The paper discusses the influence of two fatty acid methyl esters (bioesters) derived from soybean oil (SME) and from rapeseed oil (RME) on the lubricity of the petroleum diesel fuels: Ekodiesel (S:26 mg/kg, HFRR: 555 m) and Citydiesel (S: 8 mg/kg, HFRR: 617 m). High-frequency reciprocating rig (HFRR) equipment was used to examine diesel fuels, neat bioesters and blends containing from 0,1 % up...

متن کامل

Comparative study of Performance and Emission Characteristics of a Diesel Engine Fueled by Castor and jatropha methyl Ester with the help of T Test

Biofuels are playing important role in recent decades as substitutes for petro diesel. Biodiesel derived from vegetable oils are found to give comparable performance and emission characteristics. In this paper a comparative study has been done between two fuels combinations i.e. jatropha and castor. The biodiesel was prepared from neat oils and blends of biodiesel (up till 20%) were prepared...

متن کامل

Biodiesel as an Alternative Fuel for Diesel Engines

There is growing interest in biodiesel (fatty acid methyl ester or FAME) because of the similarity in its properties when compared to those of diesel fuels. Diesel engines operated on biodiesel have lower emissions of carbon monoxide, unburned hydrocarbons, particulate matter, and air toxics than when operated on petroleum-based diesel fuel. Production of fatty acid methyl ester (FAME) from rap...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014