Experimental Study on the Effect of Synthetic Jet on Flow Boiling Instability in a Microchannel

نویسندگان

  • Ruixian Fang
  • Wei Jiang
  • Jamil Khan
چکیده

Two-phase flow instability in microchannel flow boiling exhibits pressure fluctuations with different frequencies and amplitudes. One possible way to suppress the dynamic instability is to introduce synthetic jet near the inlet of the channel. An important feature of synthetic jet is that it allows momentum transfer into the microchannel flow without net mass injection into it. The strength and frequency of the jet can be controlled by changing the driving voltage and frequency of the piezoelectric driven jet actuator. The effects of the synthetic jet together with upstream throttling are evaluated as a means of stabilizing the flow boiling instability. The results are compared with the case without synthetic jet. The pressure dynamics of the microchannel flow caused by the synthetic jet are also analyzed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Subcooled two-phase flow boiling in a microchannel heat sink: comparison of conventional numerical models

Subcooled flow boiling in multi-microchannels can be used as an efficient thermal management approach in compact electrical devices. Highly subcooled flow boiling of HFE 7100 is studied in two microchannel heat sinks to choose a proper numerical model for simulating boiling flows in microchannels. Results of five different numerical models, including Volume of Fluid (VOF), Eulerian boiling, Eul...

متن کامل

Experimental Heat Transfer Enhancement in Single-phase Liquid Microchannel Cooling with Cross-flow Synthetic Jet

The present study experimentally investigated a new hybrid cooling scheme by combination of a microchannel heat sink with a micro-synthetic jet actuator. The heat sink consisted of a single rectangular microchannel measured 550 μm wide, 500 μm deep and 26 mm long. The synthetic jet actuator with a 100 μm diameter orifice was placed right above the microchannel and 5 mm downstream from the chann...

متن کامل

Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube

In the present work, the critical heat flux measurements were performed for the subcooled flow boiling of pure water and magnetic nanofluids (i.e., water + 0.01 and 0.1 vol.% Fe‌‌3O4) in a vertical tube. The effect of applying an external magnetic field on the CHF variation was studied experimentally as well. The obtained results indicated that the subcooled flow boiling CHF in the vertical tub...

متن کامل

Experimental Investigation of Surface Roughness Effect on Flow Boiling in Internal Combustion Engine Water Jacket

The subjects of heat transfer and cooling system are very important topics in the Internal Combustion Engines (ICE). In modern cooling systems, low weight, small size and high compactness are the critical designing criteria that requires heat transfer enhancement. Boiling phenomenon which is occurred in the water jacket of the ICE is one of the methods to increase heat transfer in the coolant s...

متن کامل

Experimental Heat Transfer Enhancement for Single Phase Liquid Micro-Channel Cooling Using A Micro-Synthetic Jet Actuator

The present work experimentally investigates the thermal effects of a synthetic jet actuator on the heat transfer performance of single-phase flow confined in a microchannel heat sink. The heat sink consisted of a single rectangular microchannel 500 μm wide, 300 μm deep and 26 mm long. Deionized water was employed as the cooling fluid. A synthetic jet actuator with a 100 μm diameter orifice was...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011